Îles Marshall

According to the definitions of the International Labour Organisation (ILO) for the purposes of the labour market statistics people are classified as employed, unemployed and economically inactive. The economically active population is the sum of employed and unemployed persons. Inactive persons are those who, during the reference week, were neither employed nor unemployed. The data source from the quarterly EU Labour Force Survey (EU LFS).

The data describe the average use of chemical and mineral fertilizers per area of cropland (arable land and permanent crops) at national, regional, and global level in a time series from 2002 to 2014The data describe the average use of chemical and mineral fertilizers per area of cropland (arable land and permanent crops) at national, regional, and global level in a time series from 2002 to 2015

commitment is a firm written obligation by a government or official agency, backed by the appropriation or availability of the necessary funds, to provide resources of a specified amount under specified financial terms and conditions and for specified purposes for the benefit of a recipient country or a multilateral agency. Members unable to comply with this definition should explain the definition that they use. -- Commitments are considered to be made at the date a loan or grant agreement is signed or the obligation is otherwise made known to the recipient (e.g. in the case of budgetary allocations to overseas territories, the final vote of the budget should be taken as the date of commitment). For certain special expenditures, e.g. emergency aid, the date of disbursement may be taken as the date of commitment. -- Bilateral commitments comprise new commitments and additions to earlier commitments, excluding any commitments cancelled during the same year. Cancellations and reductions in the year reported on of commitments made in earlier years are reported in the CRS, but not in the DAC questionnaire. -- In contrast to bilateral commitments, commitments of capital subscriptions, grants and loans to multilateral agencies should show the sum of amounts which are expected to be disbursed before the end of the next year and amounts disbursed in the year reported on but not previously reported as a commitment. For capital subscriptions in the form of notes payable at sight, enter the expected amount of deposits of such notes as the amount committed.

Destination of Official Development Assistance Disbursements. Geographical breakdown by donor, recipient and for some types of aid (e.g. grant, loan, technical co-operation) on a disbursement basis (i.e. actual expenditures). The data cover flows from bilateral and multilateral donors which focus on flows from DAC member countries and the EU Institutions.

Australia's international merchandise trade statistics record goods which add to or subtract from the stock of material resources of Australia by entering (imports) or leaving (exports) its territory. Goods simply transported through Australia (goods in transit), or temporarily admitted or withdrawn, do not add to or subtract from Australia's stock of material resources and are not included in Australia's international merchandise trade statistics.

Data cited at: Balance of Payments, The International Monetary Fund. The Balance of Payments provides a framework that is applicable for a range of economies, from the smallest and least developed economies to the more advanced and complex economies. As a result, it is recognized that some items may not be relevant in all cases. The balance of payments is a statistical statement that summarizes transactions between residents and nonresidents during a period. It consists of the goods and services account, the primary income account, the secondary income account, the capital account, and the financial account. Contains balance of payments and international investment position (IIP) data of individual countries, jurisdictions, and other reporting entities, and regional and world totals for major components of the balance of payments. Both balance of payments and IIP data are presented in accordance with the standard components of the sixth edition of the Balance of Payments and International Investment Position Manual, BPM6. Balance of payments data are available for approximately 192 economies and international investment position data are available for approximately 152 economies.

This data set provides a snapshot of migration and remittances for all countries, regions and income groups of the world, compiled from available data from various sources

Note: No further updates planned by source Data cited at: The World Bank https://datacatalog.worldbank.org/ Topic: Jobs Publication: https://datacatalog.worldbank.org/dataset/jobs License: http://creativecommons.org/licenses/by/4.0/   The World Bank Jobs Statistics Over 150 indicators on labor-related topics, covering over 200 economies from 1990 to present.

The data are central government bond yields which are no longer updated.

The data are central government bond yields which are no longer updated.

Dans le but de promouvoir la comparabilité internationale, les statistiques présentées sur ILOSTAT sont basées sur des définitions internationales standard dans la mesure du possible et peuvent différer des chiffres nationaux officiels. Cette série est basée sur les définitions de la 13e CIST. Pour la comparabilité des séries chronologiques, elle inclut les pays qui ont mis en >uvre les normes de la 19e CIST, pour lesquels des données sont également disponibles dans la base de données Statistiques du travail -- 19e CIST (WORK). Les chômeurs comprennent toutes les personnes qui se trouvent: a) sans travail pendant la période de référence, c'est-à-dire pas en emploi ni salarié ni non salarié; b) disponibles pour travailler dans un emploi salarié ou non salarié durant la période de référence; et c) à la recherche d'un travail, c'est-à-dire ayant pris des dispositions spécifiques au cours d'une période récente spécifiée pour chercher un emploi salarié ou non salarié. Pour plus d'informations, reportez-vous à la description de la base de données Statistiques sur la main-d'oeuvre (LFS et STLFS).

Climate Change Knowledge Portal, Temperature and Rainfall: Historical Data (CRU Observed)

Business surveys provide a rapid means of compiling simple statistics with the results available before those of traditional statistical methods, and provide also information on areas not covered by quantitative statistics. Details provided by respondents are generally of very high quality since the questions related to subjects with which they are familiar, thus the past and future performance of their business is highly reliable. Similarly, consumers provide a very high quality information on their purchasing information and price trend. Source: DG ECFIN

Eurostat Dataset Id:ei_bsbu_m_r2 Six qualitative surveys are conducted on a monthly basis in the following areas: manufacturing industry, construction, consumers, retail trade, services and financial services. Some additional questions are asked on a quarterly basis in the surveys in industry, services, financial services, construction and among consumers. In addition, a survey is conducted twice a year on Investment in the manufacturing sector. The domain consists of a selection for variables from the following type of survey: Industry monthly questions for: production, employment expectations, order-book levels, stocks of finished products and selling price. Industry quarterly questions for:production capacity, order-books, new orders, export expectations, capacity utilization, Competitive position and factors limiting the production. Construction monthly questions for: trend of activity, order books, employment expectations, price expectations and factors limiting building activity. Construction quarterly questions for: operating time ensured by current backlog. Retail sales monthly questions for: business situation, stocks of goods, orders placed with suppliers and firm's employment. Services monthly questions for: business climate, evolution of demand, evolution of employment and selling prices. Services quarterly question for: factors limiting their business Consumer monthly questions for: financial situation, general economic situation, price trends, unemployment, major purchases and savings. Consumer quarterly questions for: intention to buy a car, purchase or build a home, home improvements. Financial services monthly questions for: business situation, evolution of demand and employment Financial services quarterly questions for: operating income, operating expenses, profitability of the company, capital expenditure and competitive position Monthly Confidence Indicators are computed for industry, services, construction, retail trade, consumers (at country level, EU and euro area level) and financial services (EU and euro area). An Economic Sentiment indicator (ESI) is calculated based on a selection of questions from industry, services, construction, retail trade and consumers at country level and aggregate level (EU and euro area). A monthly Euro-zone Business Climate Indicator is also available for industry. The data are published:as balance i.e. the difference between positive and negative answers (in percentage points of total answers)as indexas confidence indicators (arithmetic average of balances),at current level of capacity utilization (percentage)estimated months of production assured by orders (number of months)Unadjusted (NSA) and seasonally adjusted (SA)

Industry, Trade and Services statistics are part of Short-term statistics (STS), they give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification(Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are presented in the following forms: UnadjustedCalendar adjustedSeasonally-adjusted Depending on the STS regulation, data are accessible monthly and quarterly. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction Index*Turnover IndexProducer Prices (Domestic Output Prices index)*Import Prices Index*: Total, Euro area market, Non euro area market (euro area countries only)Labour Input Indicators: Number of Persons Employed, Hours Worked, Gross Wages and SalariesCONSTRUCTIONProduction Index*: Total of the construction sector, Building construction, Civil EngineeringLabour input indicators: Number of Persons Employed, Hours Worked, Gross Wages and SalariesConstruction costs IndexBuilding permits indicators*: Number of dwellingsWHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (in value)Labour input indicators: Number of Persons EmployedSERVICES  Turnover Index* Producer prices (Ouput prices)*

The objective of the construction cost index is to show the development of costs incurred by the contractor/producer to carry out the construction process, in others words the cost of labour, materials and plant and overheads. The construction sector corresponds to the NACE Rev. 2 section F but the split between building construction and civil engineering (CC1, CC2) is based on the Classification of types of Construction. Building construction (CC1) is further subdivided in residential building (CC11) and non-residential building (CC12). The data provided in this table concerns residential building excluding the subgroup of residencies for communities (CC11 excluding CC113). Data are not seasonally adjusted.

Data cited at: Consumer price indexes, The International Monetary Fund Consumer price indexes (CPIs) are index numbers that measure changes in the prices of goods and services purchased or otherwise acquired by households, which households use directly, or indirectly, to satisfy their own needs and wants. In practice, most CPIs are calculated as weighted averages of the percentage price changes for a specified set, or ‘‘basket’’, of consumer products, the weights reflecting their relative importance in household consumption in some period. CPIs are widely used to index pensions and social security benefits. CPIs are also used to index other payments, such as interest payments or rents, or the prices of bonds. CPIs are also commonly used as a proxy for the general rate of inflation, even though they measure only consumer inflation. They are used by some governments or central banks to set inflation targets for purposes of monetary policy. The price data collected for CPI purposes can also be used to compile other indices, such as the price indices used to deflate household consumption expenditures in national accounts, or the purchasing power parities used to compare real levels of consumption in different countries.

Eurostat Dataset Id:ei_bsco_m Six qualitative surveys are conducted on a monthly basis in the following areas: manufacturing industry, construction, consumers, retail trade, services and financial services. Some additional questions are asked on a quarterly basis in the surveys in industry, services, financial services, construction and among consumers. In addition, a survey is conducted twice a year on Investment in the manufacturing sector. The domain consists of a selection for variables from the following type of survey: Industry monthly questions for: production, employment expectations, order-book levels, stocks of finished products and selling price. Industry quarterly questions for:production capacity, order-books, new orders, export expectations, capacity utilization, Competitive position and factors limiting the production. Construction monthly questions for: trend of activity, order books, employment expectations, price expectations and factors limiting building activity. Construction quarterly questions for: operating time ensured by current backlog. Retail sales monthly questions for: business situation, stocks of goods, orders placed with suppliers and firm's employment. Services monthly questions for: business climate, evolution of demand, evolution of employment and selling prices. Services quarterly question for: factors limiting their business Consumer monthly questions for: financial situation, general economic situation, price trends, unemployment, major purchases and savings. Consumer quarterly questions for: intention to buy a car, purchase or build a home, home improvements. Financial services monthly questions for: business situation, evolution of demand and employment Financial services quarterly questions for: operating income, operating expenses, profitability of the company, capital expenditure and competitive position Monthly Confidence Indicators are computed for industry, services, construction, retail trade, consumers (at country level, EU and euro area level) and financial services (EU and euro area). An Economic Sentiment indicator (ESI) is calculated based on a selection of questions from industry, services, construction, retail trade and consumers at country level and aggregate level (EU and euro area). A monthly Euro-zone Business Climate Indicator is also available for industry. The data are published:as balance i.e. the difference between positive and negative answers (in percentage points of total answers)as indexas confidence indicators (arithmetic average of balances),at current level of capacity utilization (percentage)estimated months of production assured by orders (number of months)Unadjusted (NSA) and seasonally adjusted (SA)

Data cited at: Coordinated Direct Investment Survey, The International Monetary Fund. The CDIS database presents detailed data on "inward" direct investment positions (i.e., direct investment into the reporting economy) cross-classified by economy of immediate investor, and data on "outward" direct investment positions (i.e., direct investment abroad by the reporting economy) cross-classified by economy of immediate investment. The CDIS database contains breakdowns of direct investment position data, including, in most instances, separate data on net equity and net debt positions, as well as tables that present "mirror" data (i.e., tables in which data from the reporting economy are shown side-by-side with the data obtained from all other counterpart reporting economies).

Data cited at: Coordinated Portfolio Investment Survey (CPIS), The International Monetary Fund. The Coordinated Portfolio Investment Survey (CPIS) is a voluntary data collection exercise conducted under the auspices of the IMF. An economy provides data on its holdings of portfolio investment securities (data are separately requested for equity and investment fund shares, long-term debt instruments, and short-term debt instruments).   Worldwide portfolio holdings of equity and investment fund shares (31 USD trillion) at end-2017 surpasses holdings of debt securities (29.7 USD trillion). After the peak of the financial crisis in 2008, the annual growth rate of equity holdings has exceeded substantially that for debt securities holdings. That pattern is similar in all the economies with the largest cross border portfolio assets and liabilities. As per G20 emerging economies, while the holdings of equity and investment fund shares had already been consistently higher than those of debt securities, during the last five years the gap has widened even further.

The Tax Foundation’s publication Corporate Tax Rates around the World shows how statutory corporate income tax rates have developed since 1980, with data for over 200 jurisdictions for the year 2023. The dataset we compiled for the years 1980 to 2023 is made available as a resource for research.  

Data cited at: Our World in data-https://ourworldindata.org/coronavirus-source-data 

The objective of the CRS Aid Activity database is to provide a set of readily available basic data that enables analysis on where aid goes, what purposes it serves and what policies it aims to implement, on a comparable basis for all DAC members. Data are collected on individual projects and programmes. Focus is on financial data but some descriptive information is also made available.

Eurostat Dataset Id:med_ag2 The focus of this domain is on the following countries:Algeria, Egypt, Israel, Jordan, Lebanon, Morocco, Palestinian Authority, Syria, Tunisia. Data are provided for over 1000 indicators depending on the country.   The data for the Mediterranean partner countries are supplied by and under the responsibility of the national statistical authorities  of each of the countries or territories. The data and their denomination in no way constitute the  expression of an opinion by the European Commission on the  legal status of a country or territory or on the delimitation of its frontiers. Â

Data cited at : https://www.bis.org/statistics/index.htm

Data cited at: Direction of Trade Statistics, The International Monetary Fund. The Direction of Trade Statistics (DOTS) presents current figures on the value of merchandise exports and imports dis-aggregated according to a country's primary trading partners. Area and world aggregates are included in the display of trade flows between major areas of the world. Reported data is supplemented by estimates whenever such data is not available or current. Imports are reported on a cost, insurance and freight (CIF) basis and exports are reported on a free on board (FOB) basis, with the exception of a few countries for which imports are also available FOB. Time series data includes estimates derived from reports of partner countries for non-reporting and slow-reporting countries.

Les personnes pourvues d'un emploi sont toutes les personnes en âge de travailler qui, durant une brève période de référence spécifiée, se trouvaient dans une des catégories suivantes: a) emploi salarié (soit au travail ou ayant un emploi mais pas au travail), b) emploi non salarié (soit au travail ou ayant une entreprise mais pas au travail). Les données sont présentées par activité économique, qui fait référence à l'activité principale de l'établissement dans lequel la personne a travaillé pendant la période de référence, et ne dépend pas des tâches ou des fonctions spécifiques du travail de la personne, mais des caractéristiques de l'entité économique dans laquelle cette personne travaille. Pour plus d'informations, reportez-vous à notre page sur les concepts et définitions.

There has been a growing interest in monitoring patterns of trade in services around the world, which is partly associated with ongoing trade negotiations and partly due to the increasing importance of services in OECD economies. It has been developed to supplement other OECD publications on trade in services to address the data needs of trade analysts. It is also an important part of OECD's programme to facilitate the implementation of the recommendations of the revised Manual on Statistics of International Trade in Services 2010.Other commentsThe Task Force on Statistics of International Trade in Services maintains a matrix summarising the status of the trade in services data collection performed by International Organisations. The table displays links to the databases as well as update timetables, availability of metadata, availability of bilateral data, and other important characteristics.

The Economic Sentiment Indicator (ESI) is a composite indicator made up of five sectoral confidence indicators with different weights: Industrial confidence indicator, Services confidence indicator, Consumer confidence indicator, Construction confidence indicator Retail trade confidence indicator. Confidence indicators are arithmetic means of seasonally adjusted balances of answers to a selection of questions closely related to the reference variable they are supposed to track (e.g. industrial production for the industrial confidence indicator). Surveys are defined within the Joint Harmonised EU Programme of Business and Consumer Surveys. The economic sentiment indicator (ESI) is calculated as an index with mean value of 100 and standard deviation of 10 over a fixed standardised sample period. Data are compiled according to the Statistical classification of economic activities in the European Community, (NACE Rev. 2). Source: DG ECFIN

This indicator presents electricity prices charged to final consumers. Electricity prices for non-household consumers are defined as follows: Average national price in Euro per kWh without taxes applicable for the first semester of each year for medium size industrial consumers (Consumption Band Ic with annual consumption between 500 and 2000 MWh). Electricity prices for household consumers are defined as follows: Average national price in Euro per kWh including taxes and levies applicable for the first semester of each year for medium size household consumers (Consumption Band Dc with annual consumption between 2500 and 5000 kWh).

As of Jun 2021, estimates of greenhouse gas (GHG) emissions from agriculture and land use are disseminated under the FAOSTAT heading Climate Change/Emissions. This heading consolidates and replaces two previous distinct headings: Emissions-Agriculture and Emissions-Land Use, which no longer exist. Several other domains were consolidated to facilitate data access. https://fenixservices.fao.org/faostat/static/documents/GT/README_Changes_in_2021.pdf   The domain Emissions Totals consolidatesin one single dataset the information previously presented in two separate datasets: Agriculture total (previously: http://www.fao.org/faostat/en/#data/GT; containing data on non-CO2 emissions from agriculture); and Land Use total (previously: http://www.fao.org/faostat/en/#data/GL; containing CO2 and non-CO2 emissions from land use, land use change and forestry. This link no longer works).

Dans le but de promouvoir la comparabilité internationale, les statistiques présentées sur ILOSTAT sont basées sur des définitions internationales standard dans la mesure du possible et peuvent différer des chiffres nationaux officiels. Cette série est basée sur les définitions de la 13e CIST. Pour la comparabilité des séries chronologiques, elle inclut les pays qui ont mis en >uvre les normes de la 19e CIST, pour lesquels des données sont également disponibles dans la base de données Statistiques du travail -- 19e CIST (WORK). Cette série harmonisée pour l'emploi informel est dérivées en utilisant le même ensemble de critères à travers les pays pour améliorer la comparabilité. Les critères utilisés sont basés sur le statut d'emploi, le secteur institutionnel, la destination de la production, la comptabilité, l'enregistrement, la cotisation de sécurité sociale, les lieux de travail et la taille. Pour plus d'informations, reportez-vous à la description de la base de données Statistiques sur la main-d'oeuvre (LFS et STLFS).

Dans le but de promouvoir la comparabilité internationale, les statistiques présentées sur ILOSTAT sont basées sur des définitions internationales standard dans la mesure du possible et peuvent différer des chiffres nationaux officiels. Cette série est basée sur les définitions de la 13e CIST. Pour la comparabilité des séries chronologiques, elle inclut les pays qui ont mis en >uvre les normes de la 19e CIST, pour lesquels des données sont également disponibles dans la base de données Statistiques du travail -- 19e CIST (WORK). Cette série harmonisée pour l'emploi informel est dérivées en utilisant le même ensemble de critères à travers les pays pour améliorer la comparabilité. Les critères utilisés sont basés sur le statut d'emploi, le secteur institutionnel, la destination de la production, la comptabilité, l'enregistrement, la cotisation de sécurité sociale, les lieux de travail et la taille. Les données ventilées par activité économique sont présentées conformément à la version plus récente de la Classification internationale type des industries (CITI) disponible. Les données peuvent avoir été reclassées à partir de classifications nationales, qui peuvent ne pas être strictement comparables à la CITI. Pour plus d'informations, reportez-vous à la description de la base de données Statistiques sur la main-d'oeuvre (LFS et STLFS).

Dans le but de promouvoir la comparabilité internationale, les statistiques présentées sur ILOSTAT sont basées sur des définitions internationales standard dans la mesure du possible et peuvent différer des chiffres nationaux officiels. Cette série est basée sur les définitions de la 13e CIST. Pour la comparabilité des séries chronologiques, elle inclut les pays qui ont mis en >uvre les normes de la 19e CIST, pour lesquels des données sont également disponibles dans la base de données Statistiques du travail -- 19e CIST (WORK). Les personnes pourvues d'un emploi sont toutes les personnes en âge de travailler qui, durant une brève période de référence spécifiée, se trouvaient dans une des catégories suivantes: a) emploi salarié (soit au travail ou ayant un emploi mais pas au travail), b) emploi non salarié (soit au travail ou ayant une entreprise mais pas au travail). Les données ventilées par activité économique sont présentées conformément à la version plus récente de la Classification internationale type des industries (CITI) disponible. Les données peuvent avoir été reclassées à partir de classifications nationales, qui peuvent ne pas être strictement comparables à la CITI. Les données ventilées par profession sont présentées conformément à la version plus récente de la Classification Internationale Type des Professions (CITP) disponible. Les données peuvent avoir été reclassées à partir de classifications nationales, qui peuvent ne pas être strictement comparables à la CITP. Pour plus d'informations, reportez-vous à la description de la base de données Statistiques sur la main-d'oeuvre (LFS et STLFS).

Dans le but de promouvoir la comparabilité internationale, les statistiques présentées sur ILOSTAT sont basées sur des définitions internationales standard dans la mesure du possible et peuvent différer des chiffres nationaux officiels. Cette série est basée sur les définitions de la 13e CIST. Pour la comparabilité des séries chronologiques, elle inclut les pays qui ont mis en >uvre les normes de la 19e CIST, pour lesquels des données sont également disponibles dans la base de données Statistiques du travail -- 19e CIST (WORK). Les personnes pourvues d'un emploi sont toutes les personnes en âge de travailler qui, durant une brève période de référence spécifiée, se trouvaient dans une des catégories suivantes: a) emploi salarié (soit au travail ou ayant un emploi mais pas au travail), b) emploi non salarié (soit au travail ou ayant une entreprise mais pas au travail). Les données ventilées par activité économique sont présentées conformément à la version plus récente de la Classification internationale type des industries (CITI) disponible. Les données peuvent avoir été reclassées à partir de classifications nationales, qui peuvent ne pas être strictement comparables à la CITI. Pour plus d'informations, reportez-vous à la description de la base de données Statistiques sur la main-d'oeuvre (LFS et STLFS).

Dans le but de promouvoir la comparabilité internationale, les statistiques présentées sur ILOSTAT sont basées sur des définitions internationales standard dans la mesure du possible et peuvent différer des chiffres nationaux officiels. Cette série est basée sur les définitions de la 13e CIST. Pour la comparabilité des séries chronologiques, elle inclut les pays qui ont mis en >uvre les normes de la 19e CIST, pour lesquels des données sont également disponibles dans la base de données Statistiques du travail -- 19e CIST (WORK). Les personnes pourvues d'un emploi sont toutes les personnes en âge de travailler qui, durant une brève période de référence spécifiée, se trouvaient dans une des catégories suivantes: a) emploi salarié (soit au travail ou ayant un emploi mais pas au travail), b) emploi non salarié (soit au travail ou ayant une entreprise mais pas au travail). Pour plus d'informations, reportez-vous à la description de la base de données Statistiques sur la main-d'oeuvre (LFS et STLFS).

Dans le but de promouvoir la comparabilité internationale, les statistiques présentées sur ILOSTAT sont basées sur des définitions internationales standard dans la mesure du possible et peuvent différer des chiffres nationaux officiels. Cette série est basée sur les définitions de la 13e CIST. Pour la comparabilité des séries chronologiques, elle inclut les pays qui ont mis en >uvre les normes de la 19e CIST, pour lesquels des données sont également disponibles dans la base de données Statistiques du travail -- 19e CIST (WORK). Les personnes pourvues d'un emploi sont toutes les personnes en âge de travailler qui, durant une brève période de référence spécifiée, se trouvaient dans une des catégories suivantes: a) emploi salarié (soit au travail ou ayant un emploi mais pas au travail), b) emploi non salarié (soit au travail ou ayant une entreprise mais pas au travail). Pour plus d'informations, reportez-vous à la description de la base de données Statistiques sur la main-d'oeuvre (LFS et STLFS).

Dans le but de promouvoir la comparabilité internationale, les statistiques présentées sur ILOSTAT sont basées sur des définitions internationales standard dans la mesure du possible et peuvent différer des chiffres nationaux officiels. Cette série est basée sur les définitions de la 13e CIST. Pour la comparabilité des séries chronologiques, elle inclut les pays qui ont mis en >uvre les normes de la 19e CIST, pour lesquels des données sont également disponibles dans la base de données Statistiques du travail -- 19e CIST (WORK). Les personnes pourvues d'un emploi sont toutes les personnes en âge de travailler qui, durant une brève période de référence spécifiée, se trouvaient dans une des catégories suivantes: a) emploi salarié (soit au travail ou ayant un emploi mais pas au travail), b) emploi non salarié (soit au travail ou ayant une entreprise mais pas au travail). Les données ventilées par profession sont présentées conformément à la version plus récente de la Classification Internationale Type des Professions (CITP) disponible. Les données peuvent avoir été reclassées à partir de classifications nationales, qui peuvent ne pas être strictement comparables à la CITP. Pour plus d'informations, reportez-vous à la description de la base de données Statistiques sur la main-d'oeuvre (LFS et STLFS).

Dans le but de promouvoir la comparabilité internationale, les statistiques présentées sur ILOSTAT sont basées sur des définitions internationales standard dans la mesure du possible et peuvent différer des chiffres nationaux officiels. Cette série est basée sur les définitions de la 13e CIST. Pour la comparabilité des séries chronologiques, elle inclut les pays qui ont mis en >uvre les normes de la 19e CIST, pour lesquels des données sont également disponibles dans la base de données Statistiques du travail -- 19e CIST (WORK). Les personnes pourvues d'un emploi sont toutes les personnes en âge de travailler qui, durant une brève période de référence spécifiée, se trouvaient dans une des catégories suivantes: a) emploi salarié (soit au travail ou ayant un emploi mais pas au travail), b) emploi non salarié (soit au travail ou ayant une entreprise mais pas au travail). Les données ventilées par niveau d'éducation sont présentées avec référence au plus haut niveau de scolarité complété, selon la Classification internationale type de l'éducation (CITE). Les données peuvent avoir été reclassées à partir de classifications nationales, qui peuvent ne pas être strictement comparables à la CITE. Pour plus d'informations, reportez-vous à la description de la base de données Indicateurs sur l'éducation et l'inadéquation (EMI).

Eurostat Dataset Id:cens_01reisco The tables presented in the topic of educational level cover the total population for 31 countries (for more information on received tables and geographic coverage, see "2001 Census Round - Tables Received" in the Annex at the bottom of the page). The level of completeness of the tables depends largely on the availability of data at the respective national statistical institutes. There are four ways of collecting census data, namely: - the traditional method of using census questionnaires (exhaustive census); - the method of using registers and/or other administrative sources; - a combination of registers and/or other administrative sources and - surveys (complete enumerations or sample surveys). Other methods (other mixed census or micro-census) can be used as well. Details for the method employed by each country are provided in "2001 Census Method"in the Annex at the bottom of the page. In the same table you can find the dates on which the census was carried out in each country.

Regional accounts are a regional specification of the national accounts and therefore based on the same concepts and definitions as national accounts (see domain nama10). The main specific regional issues are addressed in chapter 13 of ESA2010, but not practically specified. For practical rules and recommendations on sources and methods see the publication "Manual on regional accounts methods": http://ec.europa.eu/eurostat/en/web/products-manuals-and-guidelines/-/KS-GQ-13-001 . Gross domestic product (GDP) at market prices is the final result of the production activity of resident producer units. It can be defined in three ways: 1. Output approach GDP is the sum of gross value added of the various institutional sectors or the various industries plus taxes and less subsidies on products (which are not allocated to sectors and industries). It is also the balancing item in the total economy production account. 2. Expenditure approach GDP is the sum of final uses of goods and services by resident institutional units (final consumption expenditure and gross capital formation), plus exports and minus imports of goods and services. At regional level the expenditure approach cannot be used in the EU, because there is no data on regional exports and imports.  3. Income approach GDP is the sum of uses in the total economy generation of income account: compensation of employees plus gross operating surplus and mixed income plus taxes on products less subsidies plus consumption of fixed capital. The different measures for the regional GDP are absolute figures in € and Purchasing Power Standards (PPS), figures per inhabitant and relative data compared to the EU28 average.

Data cited at: Wendling, Z. A., Emerson, J. W., Esty, D. C., Levy, M. A., de Sherbinin, A., et al. (2018). 2018 Environmental Performance Index. New Haven, CT: Yale Center for Environmental Law & Policy. https://epi.yale.edu/   The Environmental Performance Index (EPI) is constructed through the calculation and aggregation of 20 indicators reflecting national-level environmental data. These indicators are combined into nine issue categories, each of which fit under one of two overarching objectives. The two objectives that provide the overarching structure of the EPI are Environmental Health and Ecosystem Vitality. Environmental Health measures the protection of human health from environmental harm. Ecosystem Vitality measures ecosystem protection and resource management. These two objectives are further divided into nine issue categories that span high-priority environmental policy issues, including air quality, forests, fisheries, and climate and energy, among others. The issue categories are extensive but not comprehensive. Underlying the nine issue categories are 20 indicators calculated from country-level data and statistics. After more than 15 years of work on environmental performance measurement and six iterations of the EPI, global data are still lacking on a number of key environmental issues. These include: freshwater quality, toxic chemical exposures, municipal solid waste management, nuclear safety, wetlands loss, agricultural soil quality and degradation, recycling rates, adaptation, vulnerability, and resiliency to climate change, desertification.

International trade in goods statistics (ITGS) published by Eurostat measure the value and quantity of goods traded between the EU Member States (intra-EU trade) and goods traded by the EU Member States with non-EU countries (extra-EU trade). ‘Goods’ means all movable property including electricity. ‘European’ means that the statistics are compiled on the basis of the concepts and definitions set out in EU legislation. ‘National’ statistics, i.e. statistics published at national level by the Member States, are compiled on the basis of national rules which may differ from EU rules. European ITGS are the official harmonised source of information about exports, imports and the trade balances of the EU, its Member States and the euro area.   Type of users and requirements As international trade forms a major part of the world economy, statistics on trade in goods are an instrument of primary importance for numerous public and private sector decision makers. For example, international trade statistics • enable EU authorities to prepare multilateral and bilateral negotiations under the common commercial policy; • enable EU authorities to evaluate the progress of the Single Market and the integration of EU economies; • enable EU authorities to define and implement anti-dumping policies; • constitute an essential source of information for balance of payments statistics, national accounts and economic studies; and • help EU businesses conduct market research and define their commercial strategy. Statistics satisfy these needs in a variety of ways. Users may need either annual aggregated or detailed monthly data on products or partner countries. They may be interested in trade values in current prices or at constant prices. Alternatively, their interest may be in quantities rather than in values. These examples, which are far from exhaustive, show the diversity of users and their requirements. Eurostat tries to meet these various needs and to adapt to a changing environment, such as changes due to globalisation.   Extrastat and Intrastat: two data collection systems Traditionally ITGS are based on the data collected by customs authorities on trade transactions between countries. Customs declarations are used for statistical purposes as the basic data source which provides detailed information on exports and imports of goods with a geographical breakdown. The first piece of EU legislation on ITGS was adopted in 1975; it provided general guidelines on data collection and obliged Member States to send their data to Eurostat. The advent of the Single Market on 1 January 1993, with its removal of customs formalities between Member States and subsequent loss of trade statistics data sources, required the establishment of a new data collection system: Intrastat.. Since then ITGS are based on two data collection systems: Extrastat and Intrastat. Extrastat data on trade in goods with non-EU countries are collected by customs authorities and are based on the records of trade transactions in customs declarations, whereas Intrastat data are directly collected from intra-EU trade operators once a month. Alternative data sources may be used for some specific goods and movements like for among with ships, aircraft, gas and electricity.   Aggregated versus detailed data International trade in goods statistics are published through different datasets grouped into two categories:Aggregated data which refer to macroeconomic indicators for the EU and euro area. Data are aggregated by broad product categories, both monthly (short-term indicators) and annually (long-term indicators). Broad product categories are defined as one-digit codes of the Standard International Trade Classification (SITC) or aggregates of the Broad Economic Categories (BEC); andDetailed data which refer to the most detailed level of the following product nomenclatures: the Combined Nomenclature (CN), the SITC, the BEC, the Classification of Products by Activity (CPA) and the Standard Goods Classification for Transport Statistics/Revised (NSTR). Detailed data also contain aggregations at higher levels.   Statistical dimensions The frequency at which the data are compiled (data periodicity) and the product nomenclature differ depending on the dataset, but the following statistical fields are always available:reporting country: country or geo-economic area such as EU or euro area;reference period: month and/or year;trade flows: import and export;product according to the relevant classification; andpartner country: EU Member State, non-EU country or geo-economic area. Besides the dimensions listed above, specific datasets contain information on the mode of transport (e.g. by sea, by air or by road) or the statistical procedure (normal trade versus trade for processing activities).

International trade in goods statistics (ITGS) published by Eurostat measure the value and quantity of goods traded between the EU Member States (intra-EU trade) and goods traded by the EU Member States with non-EU countries (extra-EU trade). ‘Goods’ means all movable property including electricity. ‘European’ means that the statistics are compiled on the basis of the concepts and definitions set out in EU legislation. ‘National’ statistics, i.e. statistics published at national level by the Member States, are compiled on the basis of national rules which may differ from EU rules. European ITGS are the official harmonised source of information about exports, imports and the trade balances of the EU, its Member States and the euro area.   Aggregated versus detailed data International trade in goods statistics are published through different datasets grouped into two categories:Aggregated data refer to macroeconomic indicators for the EU and euro area. Monthly (short-term indicators) and annual (long-term indicators) data are aggregated by broad product categories. Broad product categories are defined as one-digit codes of the Standard International Trade Classification (SITC) or aggregates of the Broad Economic Categories (BEC).Detailed data refer to the most detailed level of the following product nomenclatures: the Combined Nomenclature (CN), the SITC, the BEC, the Classification of Products by Activity (CPA) and the Standard Goods Classification for Transport Statistics/Revised (NSTR). Detailed data also contain product aggregations at higher levels.   Statistical dimensions Data periodicity (monthly or yearly) and product nomenclature (CN, SITC, BEC or CPA) differ depending on the dataset, but the following statistical fields are always available:reporting country: country or geo-economic area such as EU or euro area;partner country: EU Member State, non-EU country or geo-economic area.reference period: month and/or year;trade flows: import and export; andproduct according to the relevant classification. Besides the dimensions listed above, specific datasets contain information on the mode of transport (e.g. by sea, by air or by road) or the statistical procedure (normal trade versus trade for processing activities).

A yield curve (which is known as the term structure of interest rates) represents the relationship between market remuneration (interest) rates and the remaining time to maturity of debt securities. The zero coupon yield curves and their corresponding time series are calculated using "AAA-rated" euro area central government bonds, i.e. debt securities with the most favourable credit risk assessment. They represent the yields to maturity of hypothetical zero coupon bonds. Source: European Central Bank.

Imports are recorded by country of origin, exports by country of destination; quantities are regarded as imported or exported when they have crossed the political boundaries of the country, whether customs clearance has taken place or not.  The concept of the physical movement of flows applies. The monthly imports and exports data collections cover following energy commodities:solid  fuels (hard coal only)oil and petroleum productsgaselectricity      For solid fuels, crude oil and NGLs, imports and exports are reported by country of ultimate origin, respectively destination, while natural gas, refinery products and feedstocks as well as electricity are reported as coming from the country of last consignment. Quantities of crude oil and petroleum products imported or exported under processing agreements (i.e. refining on account) should be included. However, transit trade, international marine and aviation bunkers are excluded from this data set. Please note that this is different from the definition of natural gas trade in the annual gas questionnaire and from the definition in the previous monthly oil and gas questionnaire (before January 2013). For further information, please consult the Energy Statistics Regulation (Regulation (EC) 1099/2008 on energy statistics) and the reporting instructions. Monthly imports and exports of energy commodities cover the full spectrum of the 28 Member States of the European Union, EFTA States, candidate countries and potential candidates. Â

Note: Ex: <0.1,<0.2,<0.3 considered as 0.1,0.2,0.3 values  

The Fertilizers by Product dataset contains information on product amounts for the Production, Trade, Agriculture Use and Other Uses of chemical and mineral fertilizers products, over the time series 2002-present. The fertilizer statistics data are validated separately for a set of over thirty individual products. Both straight and compound fertilizers are included.

This dataset FDI flows by counterpart area, BMD4 includes inward and outward Foreign Direct Investment (FDI) flows by partner country for OECD reporting economies: Inward FDI flows by partner country measure the value of cross-border direct investment transactions received by the reporting economy during a year, by source country, enabling, for example, the identification of the major sources of FDI for a specific OECD economy in that year. Inward FDI flows are allocated to the immediate investing country. Outward FDI flows by partner country measure the value of cross-border direct investment transactions from the reporting economy during a year, by destination country or region, enabling, for example, the identification of the major destinations of FDI for a specific OECD economy in that year. Outward FDI flows are allocated to the immediate counterpart country for all OECD countries. Inward and outward FDI flows by partner country are presented according to the directional principle (unless otherwise specified in the country level metadata); they are measured in USD millions and in millions of national currency.

The Food Price Monitoring Tool intends to analyse the available data on price developments through the supply chain. The supply chain is a series of economic activities that are performed by different economic actors that contribute to the production and distribution of one consumer product or a group of consumer products. The Food Price Monitoring Tool monitors 15 supply chains. It compares the price indices of four stages of the supply chain:Retail sector: the harmonised index of consumer prices (HICP)Domestic food industry: the domestic producer price index (PPId)Imported products: the import price index based on unit values from international trade in goods statisticsAgricultural commodities: the agricultural commodity prices index (ACP)

This dataset contains information on foreign direct investment (FDI) inward and outward flows and stock, expressed in millions of dollars. Foreign direct investment (FDI) is an investment made by a resident enterprise in one economy (direct investor or parent enterprise) with the objective of establishing a lasting interest in an enterprise that is resident in another economy (direct investment enterprise or foreign affiliate). The lasting interest implies the existence of a long-term relationship between the direct investor and the direct investment enterprise and a significant degree of influence on the management of the enterprise. The ownership of 10% or more of the voting power of a direct investment enterprise by a direct investor is evidence of such a relationship. FDI flows comprise mainly three components:acquisition or disposal of equity capital. FDI includes the initial equity transaction that meets the 10% threshold and all subsequent financial transactions and positions between the direct investor and the direct investment enterprise;reinvestment of earnings which are not distributed as dividends;inter-company debt.   FDI flows are transactions recorded during the reference period (typically year or quarter). FDI stocks are the accumulated value held at the end of the reference period (typically year or quarter). In 2014, many countries implemented the new guidelines for the compilation of FDI data based on the Sixth edition of the Balance of Payments and International Investment Position Manual (BPM6) and the Fourth edition of OECD Benchmark Definition of Foreign Direct Investment (BD4). One of the major changes introduced in BPM6 and BD4 is the presentation of FDI statistics on an asset/liability basis instead of the directional principle (as recommended by the previous editions of these guidelines). On an asset/liability basis, direct investment statistics are organized according to whether the investment relates to an asset or a liability for the reporting country. Under the directional principle, the direct investment statistics are organized according to the direction of the investment for the reporting country - either inward or outward. The two presentations differ in their treatment of reverse investment (reverse investment is when an affiliate provides loans to its parent). Under the directional presentation, reverse investment is subtracted to derive the total outward or inward investment of the reporting economy. Therefore, FDI statistics on an asset/liability basis tends to be higher than those under the directional principle, but such is not always the case. While the presentation on an asset/liability basis is appropriate for macroeconomic analysis (i.e. the impact on the balance of payments), the presentation on directional principle is more appropriate to assist policymakers and government officials to formulate investment policies. This is because the presentation of the FDI data on directional basis reflects the direction of influence by the foreign direct investor underlying the direct investment: inward or outward direct investment. FDI data in this table are on directional principle, unless otherwise indicated.

International Trade in Commodities in UAE

The database contains data on the production and trade in roundwood and primary wood and paper products for all countries and territories in the world. The main types of primary forest products included in are: roundwood, sawnwood, wood-based panels, pulp, and paper and paperboard. These products are detailed further. The definitions are available. The database contains details of the following topics: - Roundwood removals (production) by type of wood and assortment - Production and trade in roundwood, woodfuel and other basic products - Industrial roundwood by assortment and species - Sawnwood, panels and other primary products - Pulp and paper & paperboard. More detailed information on wood products, including definitions, can be found at http://www.fao.org/forestry/statistics/80572/en/

Freedom Status obtained by Combined Average of the Political Rights and Civil Liberties Ratings (Freedom Rating) Range 1-7; 1-2.5 Free; 3-5: Partly Free and 5.5-7: Not Free The score for the A. Electoral Process subcategory The score for the B. Political Pluralism and Participation subcategory The score for the C. Functioning of Government subcategory The score for the Political Rights category The score for the D. Freedom of Expression and Belief subcategory The score for the E. Associational and Organizational Rights subcategory The score for the F. Rule of Law subcategory The score for the G. Personal Autonomy and Individual Rights subcategory The score for the Civil Liberties category Total aggregate Score for all categories  

En matière de statistiques sur les salaires, le concept de gains s'entend de la rémunération en espèces et en nature versée aux salariés, en règle générale à intervalles réguliers, au titre des heures de travail effectuées ou du travail accompli, ainsi que de la rémunération afférente aux heures non effectuées, par exemple pour le congé annuel, d'autres congés payés ou les jours fériés. Pour plus d'informations, reportez-vous à notre page sur les concepts et définitions.

Les gains des salariés représentent la rémunération en espèces et en nature versée aux salariés, en règle générale à intervalles réguliers, au titre des heures de travail effectuées ou du travail accompli, ainsi que la rémunération afférente aux heures non effectuées, par exemple pour le congé annuel, d>autres congés payés ou les jours fériés. Les gains ne comprennent pas les contributions que les employeurs versent pour leurs salariés aux régimes de sécurité sociale et de pension, non plus que les prestations reçues par les salariés dans le cadre de ces régimes. Sont également exclues les indemnités de licenciement et de cessation de service. Les statistiques sur les gains font référence aux gains bruts, c>est-à-dire, avant toute déduction de la part de l>employeur. Il s>agit d>une série harmonisée : (1) lorsque les données collectées font référence aux gains hebdomadaires ou annuels, ceux-ci sont convertis en gains mensuels en monnaie locale grâce aux données sur le temps du travail (lorsqu>elles sont disponibles); et (2) les données sont toutes exprimées en dollars américains en tant que monnaie commune, en utilisant le taux de change avec le dollar US ou les taux de parité de pouvoir d>achat (PPA) de 2017 pour les dépenses de consommation privée. Cette dernière série permet de réaliser des comparaisons internationales en tenant compte des différences relatives de prix entre pays. Pour plus d'informations, reportez-vous à notre page sur les concepts et définitions.

Les gains des salariés représentent la rémunération en espèces et en nature versée aux salariés, en règle générale à intervalles réguliers, au titre des heures de travail effectuées ou du travail accompli, ainsi que la rémunération afférente aux heures non effectuées, par exemple pour le congé annuel, d>autres congés payés ou les jours fériés. Les gains ne comprennent pas les contributions que les employeurs versent pour leurs salariés aux régimes de sécurité sociale et de pension, non plus que les prestations reçues par les salariés dans le cadre de ces régimes. Sont également exclues les indemnités de licenciement et de cessation de service. Il s>agit d>une série harmonisée : (1) lorsque les données collectées font référence aux gains hebdomadaires, mensuels ou annuels, ceux-ci sont convertis en gains par heure grâce aux données sur le temps du travail (lorsqu>elles sont disponibles) ; et (2) les données sont toutes exprimées en dollars américains en tant que monnaie commune, en utilisant le taux de change avec le dollar US ou les taux de parité de pouvoir d>achat (PPA) de 2017 pour les dépenses de consommation privée. Cette dernière série permet de réaliser des comparaisons internationales en tenant compte des différences relatives de prix entre pays. Pour plus d'informations, reportez-vous à notre page sur les concepts et définitions.

This dataset provides information on gross domestic product (GDP), total and per capita at current and constant (2010) prices also it contains annual average growth rates of gross domestic product (GDP), total and per capita, in per cent. The total GDP is expressed in millions of dollars, while GDP per capita is expressed in dollars.

Data cited at: The World Bank https://datacatalog.worldbank.org/ Topic: Gender Statistics Publication: https://datacatalog.worldbank.org/dataset/gender-statistics License: http://creativecommons.org/licenses/by/4.0/

The general government deficit/surplus is defined in the Maastricht Treaty as general government net lending (+)/net borrowing (-) according to the European System of Accounts. The general government sector comprises central government, state government, local government, and social security funds. The relevant definitions are provided in Council Regulation 479/2009, as amended.

'The TRACE Matrix measures business bribery risk in all countries. Developed in collaboration with RAND Corporation, the TRACE Matrix provides the business community with a powerful new tool for anti-bribery risk assessment. It assesses countries across four domains - Business Interactions with Government, Anti-bribery Laws and Enforcement, Government and Civil Service Transparency, and the Capacity for Civil Society Oversight, including the role of the media - as well as nine sub-domains. Business interactions with government includes the sub-domains of “contact with government,” “expectation of paying bribes” and “regulatory burden.” These indicators capture aspects of the “keys with government” that TRACE identified as very important for business bribery through regulatory and business interviews they conducted. Anti-corruption laws enacted by a country and information about enforcement of those laws. Government and civil service transparency, which includes indicators concerning whether government budgets are publicly available and whether there are regulations addressing conflicts of interest for civil servants. Information concerning the extent of press freedom and social development, both of which serve as indicators of a robust civil society that can provide government oversight. The overall country risk score is a combined and weighted score of four domains . For each of these four "domains" (and related sub-domains), the TRACE Matrix aggregates relevant data obtained from leading public interest and international organizations, including the United Nations, the World Bank and the World Economic Forum. Based on statistical analysis of this information, each country is assigned not only an overall score between 1 and 100 — with 100 representing the greatest risk — but also scores for each of the four domains and nine sub-domains. '  TRANSLATE with xEnglishArabicHebrewPolishBulgarianHindiPortugueseCatalanHmong DawRomanianChinese SimplifiedHungarianRussianChinese TraditionalIndonesianSlovakCzechItalianSlovenianDanishJapaneseSpanishDutchKlingonSwedishEnglishKoreanThaiEstonianLatvianTurkishFinnishLithuanianUkrainianFrenchMalayUrduGermanMalteseVietnameseGreekNorwegianWelshHaitian CreolePersian  TRANSLATE with COPY THE URL BELOW BackEMBED THE SNIPPET BELOW IN YOUR SITEEnable collaborative features and customize widget: Bing Webmaster PortalBack

Data cited at: Germanwatch-https://www.germanwatch.org/en/cri 

Knoema's Global Commodities Summary dataset covers select major commodities traded globally with summary information on pricing and trade from major international data sources. The dataset is available exclusively to subscribers to the Knoema Commodities Data Pack collection.

DHL Global Connectedness Report, released in partnership with New York University’s Stern School of Business, unveils a remarkable finding: Globalization reached a record high in 2022 and has remained near that level in 2023

The Global Debt Database (GDD) is the result of a multiyear investigative process that started with the October 2016 Fiscal Monitor. The dataset includes total gross debt of the (private and public) non financial sector for an unbalanced panel of 190 advanced economies, emerging market economies and low-income countries, dating back to 1950. For more details on the methodology and definitions, please refer to Mbaye, Moreno Badia and Chae (2018). 

Research by the Global Burden of Disease Health Financing Collaborator Network produced projected health spending estimates for 2019-2050 for 204 countries and territories. The estimates cover total health spending, health spending disaggregated by source into three domestic financing source categories (government, out-of-pocket, and Prepaid Private), and development assistance for health (DAH). Retrospective health spending estimates for 1995-2018 and key covariates (including GDP per capita, total government spending, total fertility rate, and fraction of the population older than 65 years) were used to forecast GDP and health spending through 2050. Estimates are reported in constant 2020 US dollars, constant 2020 purchasing-power parity-adjusted (PPP) dollars, and as a percent of gross domestic product.

Data cited at: The World Bank https://datacatalog.worldbank.org/ Topic: Global Financial Development Publication: https://datacatalog.worldbank.org/dataset/global-financial-development License: http://creativecommons.org/licenses/by/4.0/   The Global Financial Development Database is an extensive dataset of financial system characteristics for 206 economies. The database includes measures of (1) size of financial institutions and markets (financial depth), (2) degree to which individuals can and do use financial services (access), (3) efficiency of financial intermediaries and markets in intermediating resources and facilitating financial transactions (efficiency), and (4) stability of financial institutions and markets (stability).For a complete description of the dataset and a discussion of the underlying literature, see: Martin Cihak; Asli Demirguc-Kunt; Erik Feyen; and Ross Levine, 2012. "Benchmarking Financial Systems Around the World." World Bank Policy Research Working Paper 6175, World Bank, Washington, D.C.

Citation: Global Health Observatory (GHO) Data: https://www.who.int/gho/en/: World Health Organization; 2019. Licence: CC BY-NC-SA 3.0 IGO   The GHO data provides access to indicators on priority health topics including mortality and burden of diseases, the Millennium Development Goals (child nutrition, child health, maternal and reproductive health, immunization, HIV/AIDS, tuberculosis, malaria, neglected diseases, water and sanitation), non communicable diseases and risk factors, epidemic-prone diseases, health systems, environmental health, violence and injuries, equity among others.

Data cited at: International Telecommunication Union-https://www.itu.int/en/ITU-D/Statistics/Pages/stat/default.aspx 

The Global Innovation Index 2023 captures the innovation ecosystem performance of 132 economies and tracks the most recent global innovation trends.  The GII 2023 tracks global innovation trends against a background of uncertainty caused by slow economic recovery from the COVID-19 pandemic, high-interest rates, and geopolitical conflict, but with the promise of the Digital Age and Deep Science innovation waves and technological progress.  

This table shows exports, imports and sum/average of exports and imports as percentage of nominal gross domestic product (GDP). The indicators are calculated for trade in goods, trade in services and total trade in goods and services.

This dataset provides a comprehensive view of the functions, or socioeconomic objectives, that government aims to achieve through various kinds of expenditure, comprising detailed classifications of general public service, defense, public order and safety, economic affairs, environment protection, housing and community services, health, recreation, culture and religion, education, and social protection services.

This dataset provides a comprehensive view of government expense, including detailed classifications of compensation of employees, use of goods and services, consumption of fixed capital, interest payable, subsidies payable, grants payable, social benefits, and other expense.

This dataset provides a comprehensive view of government revenue, including detailed classifications of taxes, social contributions, grants receivable, and other revenue.

This dataset provides an overview of government operations and stock positions, as well as several derived balances. The Statement of Government Operations shows revenue and expense, with their main components, the operating balance and net lending/net borrowing, as well as financing. The Balance sheet shows stock positions in assets and liabilities, with their main components, as well as net worth and net financial worth. In addition, data on gross debt and net debt are included.

The OECD Green Growth database contains selected indicators for monitoring progress towards green growth to support policy making and inform the public at large. The database synthesises data and indicators across a wide range of domains including a range of OECD databases as well as external data sources. The database covers OECD member and accession countries, key partners (including Brazil, China, India, Indonesia and South Africa) and other selected non-OECD countries.

Data cited at: CAIT, retrieved from Climate Watch Climate Watch Historical Emission data contains sector-level greenhouse gas (GHG) emissions data for 194 countries and the European Union (EU) for the period 1990-2019, including emissions of the six major GHGs from most major sources and sinks. Non-CO2 emissions are expressed in CO2 equivalents using 100-year global warming potential values from IPCC Fourth Assessment Report.

This dataset includes data on greenhouse gas emissions inventory, as reported to the European Environment Agency (EEA). Note that Eurostat is not the producer of these data, only re-publishes them. The European Union (EU) as a party to the United Nations Framework Convention on Climate Change (UNFCCC) reports annually its greenhouse gas inventory for the year t-2 and within the area covered by its Member States. The inventory contains data on carbon dioxide (CO2), methane (CH4), nitrous oxide (N2O), perfluorocarbons (PFCs), hydrofluorocarbons (HFCs), sulphur hexafluoride (SF6) and nitrogen trifluoride (NF3). The EU inventory is fully consistent with national greenhouse gas inventories compiled by the EU Member States. Values flagged with 'd' have the notation key 'IE' (included elsewhere) in the original dataset published by the EEA. Notation key combinations that include NE (not estimated), as well as values reported with the additional notation key used by EEA ' – ', are reported as missing values in the air_env_gge dataset. All notation keys combinations that include a C (confidential) are flagged as confidential. The notation keys NA and NO are not associated with a flag. EEA notation keys: NO – not occurring. NE – not estimated. NA – not applicable. IE – included elsewhere. C – confidential.

Regional accounts are a regional specification of the national accounts and therefore based on the same concepts and definitions as national accounts (see domain nama10). The main specific regional issues are addressed in chapter 13 of ESA2010, but not practically specified. For practical rules and recommendations on sources and methods see the publication "Manual on regional accounts methods": http://ec.europa.eu/eurostat/en/web/products-manuals-and-guidelines/-/KS-GQ-13-001 . Gross domestic product (GDP) at market prices is the final result of the production activity of resident producer units. It can be defined in three ways: 1. Output approach GDP is the sum of gross value added of the various institutional sectors or the various industries plus taxes and less subsidies on products (which are not allocated to sectors and industries). It is also the balancing item in the total economy production account. 2. Expenditure approach GDP is the sum of final uses of goods and services by resident institutional units (final consumption expenditure and gross capital formation), plus exports and minus imports of goods and services. At regional level the expenditure approach cannot be used in the EU, because there is no data on regional exports and imports.  3. Income approach GDP is the sum of uses in the total economy generation of income account: compensation of employees plus gross operating surplus and mixed income plus taxes on products less subsidies plus consumption of fixed capital. The different measures for the regional GDP are absolute figures in € and Purchasing Power Standards (PPS), figures per inhabitant and relative data compared to the EU Member States average.

Data in this domain constitute only a small part of the entire National Accounts data range available from Eurostat. Annual and quarterly national accounts are compiled in accordance with the European System of Accounts - ESA 2010 as defined in Annex B of the Council Regulation (EU) No 549/2013 of the European Parliament and of the Council of 21 May 2013. The previous European System of Accounts, ESA95, was reviewed to bring national accounts in the European Union, in line with new economic environment, advances in methodological research and needs of users and the updated national accounts framework at the international level, the SNA 2008. The revisions are reflected in an updated Regulation of the European Parliament and of the Council on the European system of national and regional accounts in the European Union of 2010 (ESA 2010). The associated transmission programme is also updated and data transmissions in accordance with ESA 2010 are compulsory from September 2014 onwards. Further information on the transition from ESA 95 to ESA 2010 is presented on the Eurostat website. The annual data of this domain consists of the following collections: 1. Main GDP aggregates: main components from the output, expenditure and income side.nama_10_gdp: GDP and main components (output, expenditure and income) The quarterly data of this domain consists of the following collections 1. Main GDP aggregates, main components from the output, expenditure and income side, expenditure breakdowns by industry and assets. namq_10_ma: Main GDP aggregatesnamq_10_gdp: GDP and main components (output, expenditure and income)namq_10_fcs: Final consumption aggregates by durabilitynamq_10_exi: Exports and imports by Member States of the EU/third countries 2. Breakdowns of GDP aggregates and employment data by main industries and asset classes. namq_10_bbr: Basic breakdowns main GDP aggregates and employment (by industry and assets)namq_10_a10: Gross value added and income by A*10 industrynamq_10_an6: Gross fixed capital formation by AN_F6 asset typenamq_10_a10_e: Employment by A*10 industry breakdowns Geographical entities covered are the European Union, the euro area, EU Member States, Candidate Countries, EFTA countries, US, Japan and possibly other countries on an ad-hoc basis. Data sources: National Statistical Institutes.

Harmonised Indices of Consumer Prices (HICP) give comparable measures of inflation for the countries and country groups for which they are produced. They are economic indicators that measure the change over time of the prices of consumer goods and services acquired by households. In other words, they are a set of consumer price indices (CPI) calculated according to a harmonised approach and a single set of definitions. In particular, HICP provide the official measure of consumer price inflation in the euro area for the purposes of monetary policy and the assessment of inflation convergence as required under the Maastricht criteria for accession to the euro. HICP are available for all EU Member States, Iceland, Norway and Switzerland. In addition to the individual country series there are three key country-group aggregate indices: the Monetary Union Index of Consumer Prices (MUICP or EA) covering the euro area countries, the European index of consumer prices (EICP or EU) including all Member States, and the European Economic Area index of consumer prices (EEAICP), which in addition to the EU also covers Iceland and Norway. The official country-group aggregates reflect the evolution of Economic and monetary union (EA), the EU and the EEA. The HICP for new Member States is chained into the aggregate indices at the time of accession. In addition to these official aggregates, Eurostat also computes, for analytical purposes, country aggregates with stable composition over time. For example, the aggregate 'EU-28' shows price indices covering all current 28 Member States since 1997. HICP for Turkey (candidate country) is also published. For the USA, a proxy-HICP for the all-items and main headings is available. The national HICP is produced by National Statistical Institutes, while the country-group aggregates are produced by Eurostat. The data released monthly on Eurostat's free dissemination database includes price indices and rates (monthly, annual and 12-month moving average changes). In addition to the headline figure 'all-items HICP', around one hundred sub-indices for different goods and services and over thirty special aggregates are made available. The relative weights for the indices, including the special aggregates, are published for the individual countries and for the country groups, once a year, with the January data. An early estimate of the overall inflation rate for the euro area, as well as for selected components, are published monthly, usually on the last working day of the reference month, both as a News Release and in the database. They are called 'HICP flash estimates'. HICP at constant tax rates (HICP-CT) follows the same computation principles as the HICP, but is based on prices at constant tax rates. The comparison with the standard HICP can show the potential impact of changes in indirect taxes (e.g. VAT and excise duties) on the overall inflation (more information).

Health care expenditure quantifies the economic resources dedicated to health functions, excluding capital investment. Healthcare expenditure concerns itself primarily with healthcare goods and services that are consumed by resident units, irrespective of where that consumption takes place (it may be in the rest of the world) or who is paying for it. As such, exports of healthcare goods and services (to non-resident units) are excluded, whereas imports of healthcare goods and services for final use are included. Health care expenditure data provide information on expenditure in the functionally defined area of health distinct by provider category (e.g. hospitals, general practitioners), function category (e.g. services of curative care, rehabilitative care, clinical laboratory, patient transport, prescribed medicines) and financing scheme (e.g. social security, private insurance company, household).

Health Nutrition and Population Statistics database provides key health, nutrition and population statistics gathered from a variety of international and national sources. Themes include global surgery, health financing, HIV/AIDS, immunization, infectious diseases, medical resources and usage, noncommunicable diseases, nutrition, population dynamics, reproductive health, universal health coverage, and water and sanitation.

The Harmonised Index of Consumer Prices (HICP) gives comparable measures of inflation for the countries and country groups for which it is produced. It is an economic indicator that measures the change over time of the prices of consumer goods and services acquired by households. In other words, it is a set of consumer price indices (CPI) calculated according to a harmonised approach and a set of definitions as laid down in Regulations and recommendations. In addition, the HICP provides the official measure of consumer price inflation in the euro area for the purposes of monetary policy and the assessment of inflation convergence as required under the Maastricht criteria for accession to the euro. The HICP is available for all EU Member States, Iceland, Norway and Switzerland. In addition to the individual country series there are three key country-group aggregate indices: the euro area, the European Union (EU), and the European Economic Area (EEA), which, in addition to the EU, also covers Iceland and Norway, but not Liechtenstein. The official country-group aggregates reflect the changing country composition of the EA, the EU and the EEA. The HICP for new Member States is chained into the aggregate indices at the time of accession. For analytical purposes Eurostat also computes country-group aggregates with stable country composition over time. For example, the EU28 aggregate shows price indices covering all current 28 Member States since 1997. The HICP for Serbia and Turkey (candidate countries) are also published. That data are flagged 'd' ('definition differs'). A proxy-HICP for the all-items and main aggregates is available for the USA. National HICPs are produced by National Statistical Institutes (NSIs), while the country-group aggregates are produced by Eurostat. The data released monthly on Eurostat's free dissemination database include price indices and rates of change (monthly, annual and 12-month moving average changes). In addition to the headline figure 'all-items HICP', around four hundred sub-indices for different goods and services and over thirty special aggregates are available, including the HICP at administered prices (HICP-AP). Once a year, with the release of the January data, the relative weights for the indices and the special aggregates, are published for the individual countries and for the European aggregates. The composition of the HICP-AP aggregates, i.e. which sub-indices are classified as mainly or fully administered by each Member State, is also updated at the same time. Eurostat publishes early estimates, called 'HICP flash estimates', of the euro area overall inflation rate and selected components. They are published monthly, usually on the last working day of the reference month, and disseminated in a news release, in the database and in a Statistics Explained article. The HICP at constant tax rates (HICP-CT) follows the same computation principles as the HICP, but is based on prices at constant tax rates. The comparison with the standard HICP can show the potential impact of changes in indirect taxes, such as VAT and excise duties, on the overall inflation (more information). Flags Flags provide information about the 'status' of the data or a specific data value. The following flags are used for the HICP data in the Eurostat online database: p = provisional data: Data is flagged as provisional by the National Statistical Institutes to signal that data are still being treated or validated. The 'p' flag remains attached to the HICP data values in question for one month only. r = revised data. In the case when the most recent figures published differ from previously disseminated data, they are flagged with 'r'. Countries are allowed to revise their HICP figures at any point and, therefore, revised figures may appear in historic data. The 'r' flag remains attached to the HICP data values in question for one month only. e = estimated data. All the figures of the HICP flash estimate are marked with the 'e' flag. d = definition differs, meaning that the national definition of a series differs from the ECOICOP (European Classification of Individual Consumption according to Purpose) definition. It is also used for data values from countries for which conformity with the requirements of the HICP methodology has not yet been evaluated by Eurostat, including candidate countries, pre-candidate countries, new EU Member States and the United States of America. u = unreliable data. Data is flagged as unreliable by the National Statistical Institutes. The p, e, d and u flags described here do not affect the higher level of aggregation when assigned to a figure.

Data Cited at: UNITED NATIONS DEVELOPMENT PROGRAMME, Human Development Data Center The Human Development Index (HDI) is a summary measure of achievements in three key dimensions of human development: a long and healthy life, access to knowledge and a decent standard of living. The HDI is the geometric mean of normalized indices for each of the the three dimensions.

The Fiscal Monitor surveys and analyzes the latest public finance developments, it updates fiscal implications of the crisis and medium-term fiscal projections and assesses policies to put public finances on a sustainable footing. 

The FAS is the key source of global supply-side data on financial inclusion, encompassing data on access to and usage of financial services by firms and households that can be compared across countries and over time. Contains 180 time series and 65 indicators that are expressed as ratios to GDP, land area, or adult population to facilitate cross-economy comparisons. Provision of FAS data is voluntary.

The baseline forecast is for the world economy to continue growing at 3.2 percent during 2024 and 2025, at the same pace as in 2023. A slight acceleration for advanced economies—where growth is expected to rise from 1.6 percent in 2023 to 1.7 percent in 2024 and 1.8 percent in 2025—will be offset by a modest slowdown in emerging market and developing economies from 4.3 percent in 2023 to 4.2 percent in both 2024 and 2025. The forecast for global growth five years from now—at 3.1 percent—is at its lowest in decades. Global inflation is forecast to decline steadily, from 6.8 percent in 2023 to 5.9 percent in 2024 and 4.5 percent in 2025, with advanced economies returning to their inflation targets sooner than emerging market and developing economies. Core inflation is generally projected to decline more gradually.

Imports are recorded by country of origin, exports by country of destination; quantities are regarded as imported or exported when they have crossed the political boundaries of the country, whether customs clearance has taken place or not.  The concept of the physical movement of flows applies. The monthly imports and exports data collections cover following energy commodities:solid  fuels (hard coal only)oil and petroleum productsgaselectricity      For solid fuels, crude oil and NGLs, imports and exports are reported by country of ultimate origin, respectively destination, while natural gas, refinery products and feedstocks as well as electricity are reported as coming from the country of last consignment. Quantities of crude oil and petroleum products imported or exported under processing agreements (i.e. refining on account) should be included. However, transit trade, international marine and aviation bunkers are excluded from this data set. Please note that this is different from the definition of natural gas trade in the annual gas questionnaire and from the definition in the previous monthly oil and gas questionnaire (before January 2013). For further information, please consult the Energy Statistics Regulation (Regulation (EC) 1099/2008 on energy statistics) and the reporting instructions. Monthly imports and exports of energy commodities cover the full spectrum of the 28 Member States of the European Union, EFTA States, candidate countries and potential candidates. Â

Les données peuvent différer des chiffres communiqués au niveau national et de la base de données des indicateurs mondiaux des ODD en raison de différences dans les sources et/ou les années de référence. Cet indicateur présente des données par sexe sur les gains moyens par heure des salariés. En matière de statistiques sur les salaires, le concept de gains s'entend de la rémunération en espèces et en nature versée aux salariés, en règle générale à intervalles réguliers, au titre des heures de travail effectuées ou du travail accompli, ainsi que de la rémunération afférente aux heures non effectuées, par exemple pour le congé annuel, d'autres congés payés ou les jours fériés. Les gains ne comprennent pas les contributions que les employeurs versent pour leurs salariés aux régimes de sécurité sociale et de pension, non plus que les prestations reçues par les salariés dans le cadre de ces régimes. Sont également exclues les indemnités de licenciement et de cessation de service. Les données sont aussi ventilées par profession. Les statistiques sur les gains moyens par heure des salariés ventilées par sexe sont la base du calcul de l'écart salarial entre hommes et femmes. Les données ventilées par profession sont présentées conformément à la version plus récente de la Classification Internationale Type des Professions (CITP) disponible. Les données peuvent avoir été reclassées à partir de classifications nationales, qui peuvent ne pas être strictement comparables à la CITP. Pour plus d'informations, reportez-vous à la description de la base de données Indicateurs des ODD liés au marché du travail (ILOSDG).

Les données peuvent différer des chiffres communiqués au niveau national et de la base de données des indicateurs mondiaux des ODD en raison de différences dans les sources et/ou les années de référence. Cet indicateur transmet la proportion de l'emploi dans les activités manufacturières (ou activités de fabrication). l'emploi dans la manufacture se définit selon la Classification internationale type, par industrie, de toutes les branches d'activité économique (CITI). l'emploi comprend toutes les personnes en âge de travailler qui, durant une brève période de référence spécifiée, étaient en emploi salarié (soit au travail ou ayant un emploi mais pas au travail), ou en emploi indépendant (soit au travail ou ayant une entreprise mais pas au travail). Cet indicateur est calculé à partir de données sur l'emploi par sexe et activité économique. Pour plus d'informations, reportez-vous à la description de la base de données Indicateurs des ODD liés au marché du travail (ILOSDG).

La collection primaire d'indicateurs de développement de la Banque mondiale, compilée à partir de sources internationales officiellement reconnues. Il présente les données les plus récentes et les plus précises sur le développement mondial et comprend des estimations nationales, régionales et mondiales.

Eurostat Dataset Id:ei_bsin_m_r2 Six qualitative surveys are conducted on a monthly basis in the following areas: manufacturing industry, construction, consumers, retail trade, services and financial services. Some additional questions are asked on a quarterly basis in the surveys in industry, services, financial services, construction and among consumers. In addition, a survey is conducted twice a year on Investment in the manufacturing sector. The domain consists of a selection for variables from the following type of survey: Industry monthly questions for: production, employment expectations, order-book levels, stocks of finished products and selling price. Industry quarterly questions for:production capacity, order-books, new orders, export expectations, capacity utilization, Competitive position and factors limiting the production. Construction monthly questions for: trend of activity, order books, employment expectations, price expectations and factors limiting building activity. Construction quarterly questions for: operating time ensured by current backlog. Retail sales monthly questions for: business situation, stocks of goods, orders placed with suppliers and firm's employment. Services monthly questions for: business climate, evolution of demand, evolution of employment and selling prices. Services quarterly question for: factors limiting their business Consumer monthly questions for: financial situation, general economic situation, price trends, unemployment, major purchases and savings. Consumer quarterly questions for: intention to buy a car, purchase or build a home, home improvements. Financial services monthly questions for: business situation, evolution of demand and employment Financial services quarterly questions for: operating income, operating expenses, profitability of the company, capital expenditure and competitive position Monthly Confidence Indicators are computed for industry, services, construction, retail trade, consumers (at country level, EU and euro area level) and financial services (EU and euro area). An Economic Sentiment indicator (ESI) is calculated based on a selection of questions from industry, services, construction, retail trade and consumers at country level and aggregate level (EU and euro area). A monthly Euro-zone Business Climate Indicator is also available for industry. The data are published:as balance i.e. the difference between positive and negative answers (in percentage points of total answers)as indexas confidence indicators (arithmetic average of balances),at current level of capacity utilization (percentage)estimated months of production assured by orders (number of months)Unadjusted (NSA) and seasonally adjusted (SA)

The present data collection consists of the following indicators:Interest rates : Day-to-day money market interest rates, 3-month interest rates, Euro yields and Long term government bond yields - Maastricht definitionEuro/Ecu exchange rates: Exchange rates against the ECU/euroEffective exchange rates indices : Nominal Effective Exchange Rate, Real Effective Exchange Rate Â

Data retrieved from FRED, Federal Reserve Bank of St. Louis; https://fred.stlouisfed.org/   FRED Economic Research Division "International Data" dataset contains series for the following categories: money, banking & finance; national accounts; population, employment & labor markets; production & business activity; prices; work started; consumer opinion surveys; business tendency surveys (construction); business tendency surveys (services); business tendency surveys (manufacturing); business tendency surveys (non-manufacturing); leading indicators OECD; business tendency surveys (retail trade).

Data cited at: International Financial Statistics (IFS), The International Monetary Fund. The International Financial Statistics database covers about 200 countries and areas, with some aggregates calculated for selected regions, plus some world totals. Topics covered include balance of payments, commodity prices, exchange rates, fund position, government finance, industrial production, interest rates, international investment position, international liquidity, international transactions, labor statistics, money and banking, national accounts, population, prices, and real effective exchange rates. The International Financial Statistics is based on various IMF data collections. It includes exchange rates series for all Fund member countries plus Anguilla, Aruba, China, PR: Hong Kong, China, PR: Macao, Montserrat, and the Netherlands Antilles. It also includes major Fund accounts series, real effective exchange rates, and other world, area, and country series. Data are available for most IMF member countries with some aggregates calculated for select regions, plus some world totals. National Accounts, Indicators of Economic Activity, Labor Markets, Prices, Government and Public Sector Finance, Financial Indicators, Balance of Payments, International Investment Position, International Reserves, Fund Accounts, External Trade, Exchange Rates, and Population.

The estimates are based on official statistics on the foreign-born or the foreign population, classified by sex, and age. Most of the statistics utilised to estimate the international migrant stock were obtained from population censuses. Additionally, population registers and nationally representative surveys provided information on the number and composition of international migrants. The designations employed and the material in this publication do not imply the expression of any opinion whatsoever on the part of the Secretariat of the United Nations concerning the legal status of any country, territory or area or its authorities, or concerning the delimitation of its frontiers or boundaries. The term “country” as used in this publication also refers, as appropriate, to territories or areas. The names and composition of geographical areas follow those presented in “Standard country or area codes for statistical use” (ST/ESA/STAT/SER.M/49/Rev.3), available at http://unstats.un.org/unsd/methods/m49/m49.htm.

Unit of measure used: Thousands   OECD countries seldom have tools specifically designed to measure the inflows and outflows of the foreign population, and national estimates are generally based either on population registers or residence permit data. This note is aimed at describing more systematically what is measured by each of the sources used.   Flows derived from population registers   Population registers can usually produce inflow and outflow data for both nationals and foreigners. To register, foreigners may have to indicate possession of an appropriate residence and/or work permit valid for at least as long as the minimum registration period. Emigrants are usually identified by a stated intention to leave the country, although the period of (intended) absence is not always specified.   When population registers are used, departures tend to be less well recorded than arrivals. Indeed, the emigrant who plans to return to the host country in the future may be reluctant to inform about his departure to avoid losing rights related to the presence on the register. Registration criteria vary considerably across countries (as the minimum duration of stay for individuals to be defined as immigrants ranges from three months to one year), which poses major problems of international comparison. For example, in some countries, register data cover a portion of temporary migrants, in some cases including asylum seekers when they live in private households (as opposed to reception centres or hostels for immigrants) and international students.   Flows derived from residence and/or work permits   Statistics on permits are generally based on the number of permits issued during a given period and depend on the types of permits used. The so-called “settlement countries” (Australia, Canada, New Zealand and the United States) consider as immigrants persons who have been granted the right of permanent residence. Statistics on temporary immigrants are also published in this database for these countries since the legal duration of their residence is often similar to long-term migration (over a year). In the case of France, the permits covered are those valid for at least one year (excluding students). Data for Italy and Portugal include temporary migrants.   Another characteristic of permit data is that flows of nationals are not recorded. Some flows of foreigners may also not be recorded, either because the type of permit they hold is not tabulated in the statistics or because they are not required to have a permit (freedom of movement agreements). In addition, permit data do not necessarily reflect physical flows or actual lengths of stay since: i) permits may be issued overseas but individuals may decide not to use them, or delay their arrival; ii) permits may be issued to persons who have in fact been resident in the country for some time, the permit indicating a change of status, or a renewal of the same permit.   Permit data may be influenced by the processing capacity of government agencies. In some instances a large backlog of applications may build up and therefore the true demand for permits may only emerge once backlogs are cleared.   Flows estimated from specific surveys   Ireland provides estimates based on the results of Quarterly National Household Surveys and other sources such as permit data and asylum applications. These estimates are revised periodically on the basis of census data. Data for the United Kingdom are based on a survey of passengers entering or exiting the country by plane, train or boat (International Passenger Survey). One of the aims of this survey is to estimate the number and characteristics of migrants. The survey is based on a random sample of approximately one out of every 500 passengers. The figures were revised significantly following the latest census in each of these two countries, which seems to indicate that these estimates do not constitute an “ideal” source either. Australia and New Zealand also conduct passenger surveys which enable them to establish the length of stay on the basis of migrants’ stated intentions when they enter or exit the country.

The international goods and services deficit was $74.6 billion in April, up $14.0 billion from $60.6 billion in March. April exports were $249.0 billion, $9.2 billion less than March exports. April imports were $323.6 billion, $4.8 billion more than March imports. 

This dataset contains the graduation rate status as of 2021 for the cohort of full-time, first-time degree / certificate-seeking undergraduates in both four year and two year institutions. Data for four year institutions include the number of bachelor degree-seeking students who were enrolled in 2011, the number of bachelor degree seeking students who completed any degree / certificate within 150 percent of normal time, the number who completed a bachelor's degree within 100, 125 or 150 percent of normal time, and the number of bachelor's degree-seeking students who transferred out. Data for students seeking a degree / certificate other than a bachelor's degree are also included for four year institutions. Data for two year institutions include the number of full-time, first-time students who were enrolled in 2014, the number of students who completed any degree / certificate within 100 or 150 percent of normal time and the number of students who transferred out. This file has multiple records per institution. Records are uniquely defined by the variables IPEDS ID (UNITID), and the cohort and graduation status within the cohort (GRTYPE). Each record will contain the above data by gender and race / ethnicity. Note: The number of students who completed a degree / certificate within 100 percent of normal time is not available by race / ethnicity and gender. "This file contains the graduation rate status as of August 31, 2017 for the cohort of full-time, first-time degree / certificate-seeking undergraduates in both four year and two year institutions. Data for four year institutions include the number of bachelor degree-seeking students who were enrolled in 2011, the number of bachelor's degree seeking students who completed any degree / certificate within 150 percent of normal time, the number who completed a bachelor's degree within 100, 125 or 150 percent of normal time, and the number of bachelor's degree-seeking students who transferred out . Data for students seeking a degree / certificate other than a bachelor's degree are also included for four year institutions. Data for two year institutions include the number of full-time, first-time students who were enrolled in 2014, the number of students who completed any degree / certificate within 100 or 150 percent of normal time and the number of students who transferred out. This file has multiple records per institution. Records are uniquely defined by the variables IPEDS ID (UNITID), and the cohort and graduation status within the cohort (GRTYPE). Each record will contain the above data by gender and race / ethnicity. Note: The number of students who completed a degree / certificate within 100 percent of normal time is not available by race / ethnicity and gender.

Data cited at: Prof.Prof. Lauren Gardner; Center for Systems Science and Engineering at John Hopkins University, blog Post -  https://systems.jhu.edu/research/public-health/ncov/   On December 31, 2019, the World Health Organization (WHO) was informed of an outbreak of “pneumonia of unknown cause” detected in Wuhan City, Hubei Province, China – the seventh-largest city in China with 11 million residents. As of February 04, 2020, there are over 24,502 cases confirmed globally, including cases in at least 30 regions in China and 30 countries.  Interests: In-Market Segments Knoema All Users   Knoema modified the original dataset to include calculations per million.   https://knoema.com/WBPEP2018Oct https://knoema.com/USICUBDS2020 https://knoema.com/NBSCN_P_A_A0301 https://knoema.com/IMFIFSS2017Nov https://knoema.com/AUDSS2019 https://knoema.com/UNAIDSS2017 https://knoema.com/UNCTADPOPOCT2019Nov https://knoema.com/WHOWSS2018 https://knoema.com/KPMGDHC2019

The Joint External Debt Hub (JEDH) -jointly developed by the Bank for International Settlements (BIS), the International Monetary Fund (IMF), the Organization for Economic Cooperation and Development (OECD) and the World Bank (WB) -brings together external debt data and selected foreign assets from international creditor / market and national debtor sources. The JEDH replaces the Joint BIS-IMF-OECD-WB Statistics on External Debt, a website that was launched in 1999 to provide international data, mainly from creditor sources, on the external debt of developing and transition countries and territories.

Labour cost statistics constitute a hierarchical system of multi-annual, yearly and quarterly statistics, designed to provide a comprehensive and detailed picture of the level, structure and short-term development of labour costs in the different sectors of economic activity in the European Union and certain other countries. All statistics are based on a harmonised definition of labour costs. The quarterly Labour Cost Index (LCI) is a Euro Indicator which measures the cost pressure arising from the production factor "labour". The data covered in the LCI collection relate to total average hourly labour costs and to the labour cost categories "wages and salaries" and "employers' social security contributions plus taxes paid minus subsidies received by the employer". Data - also broken down by economic activity, are available for the EU aggregates and EU Member States (NACE Rev 1.1 Sections C to K (1996Q1-2008Q4) and NACE Rev 2 Sections B to S), in working day and seasonally adjusted form. The data on the Labour Cost Index are given in the form of index numbers (current base year: 2016) and of annual and quarterly growth rates (comparison with the previous quarter, or the same quarter of the previous year). On annual basis the labour cost levels (in Euro and national currency) are also published, based on the latest Labour Cost Survey inflated by the LCI. In contrast to the information collected for the other Labour Cost domains, the labour costs covered in the LCI do not include vocational training costs and other expenditure such as recruitment costs and working clothes expenditure. The data are estimated by the National Statistical Institutes on the basis of available structural and short-term information from samples and administrative records for enterprises of all sizes. The labour cost index (LCI) shows the short-term development of the labour cost, the total cost on an hourly basis of employing labour. In other words, the LCI measures the cost pressure arising from the production factor “labour”.  In addition, Eurostat estimates of the annual labour cost per hour in euros are provided for EU Member States as well as the whole EU; they were obtained by combining the four-yearly Labour cost survey (LCS) with the quarterly labour cost index. 

Labour cost statistics constitute a hierarchical system of multi-annual, yearly and quarterly statistics, designed to provide a comprehensive and detailed picture of the level, structure and short-term development of labour costs in the different sectors of economic activity in the European Union and certain other countries. All statistics are based on a harmonised definition of labour costs. The quarterly Labour Cost Index (LCI) is a Euro Indicator which measures the cost pressure arising from the production factor "labour". The data covered in the LCI collection relate to total average hourly labour costs and to the labour cost categories "wages and salaries" and "employers' social security contributions plus taxes paid minus subsidies received by the employer". Data - also broken down by economic activity, are available for the EU aggregates and EU Member States (NACE Rev 1.1 Sections C to K (1996Q1-2008Q4) and NACE Rev 2 Sections B to S), in working day and seasonally adjusted form. The data on the Labour Cost Index are given in the form of index numbers (current reference year: 2012) and of annual and quarterly growth rates (comparison with the previous quarter, or the same quarter of the previous year). On annual basis the labour cost levels (in Euro and national currency) are also published, based on the latest Labour Cost Survey inflated by the LCI. In contrast to the information collected for the other Labour Cost domains, the labour costs covered in the LCI do not include vocational training costs and other expenditure such as recruitment costs and working clothes expenditure. The data are estimated by the National Statistical Institutes on the basis of available structural and short-term information from samples and administrative records for enterprises of all sizes.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Gross domestic product (GDP) is a measure for the economic activity. It is defined as the value of all goods and services produced less the value of any goods or services used in their creation. GDP per person employed is intended to give an overall impression of the productivity of national economies expressed in relation to the European Union average. If the index of a country is higher than 100, this country's level of GDP per person employed is higher than the EU average and vice versa. Basic figures are expressed in PPS, i.e. a common currency that eliminates the differences in price levels between countries allowing meaningful volume comparisons of GDP between countries. Please note that 'persons employed' does not distinguish between full-time and part-time employment. Labour productivity per hour worked is calculated as real output per unit of labour input (measured by the total number of hours worked). Measuring labour productivity per hour worked provides a better picture of productivity developments in the economy than labour productivity per person employed, as it eliminates differences in the full time/part time composition of the workforce across countries and years.

Data cited at : https://www.bis.org/statistics/index.htm

Long term government bond yields are calculated as monthly averages (non seasonally adjusted data). They refer to central government bond yields on the secondary market, gross of tax, with a residual maturity of around 10 years. The bond or the bonds of the basket have to be replaced regularly to avoid any maturity drift. This definition is used in the convergence criteria of the Economic and Monetary Union for long-term interest rates, as required under Article 121 of the Treaty of Amsterdam and the Protocol on the convergence criteria. Data are presented in raw form. Source: European Central Bank (ECB)

Europop2013, the latest population projections released by Eurostat, provide a set of different scenarios for possible population developments at national and at regional levels across 31 European countries: for each EU-28 Member State as well as for Iceland, Norway and Switzerland. These population projections were produced using data for 1 January 2013 as a starting point and therefore include any modifications made to demographic statistics resulting from the 2011 population census exercise. They were developed based on application of a main input dataset of assumptions on future developments for fertility, mortality and net migration (including statistical adjustment) covering the time period 2013 to 2080. Europop2013 at national level includes detailed statistical information related to the main scenario and its four variants with reference to:projected population on 1 January by age and sex;assumptions datasets: age-specific fertility rates, age-specific mortality rates and international net migration figures (including statistical adjustment);approximated values of the life expectancy by age and sex for the main scenario and the higher life expectancy variant;total numbers of the projected live births and deaths;projected population structure indicators: shares of broad age groups in total population, old-age dependency ratios and median age of population;the time horizon covered is from 2013 until 2080 for the main scenario and no migration variant, and from 2013 until 2060 for the higher life expectancy, reduced migration and lower fertility variants. Europop2013 at regional level covers all the regions classified as NUTS level 2 and NUTS level 3 corresponding to the NUTS-2010 classification (the Nomenclature of Territorial Units for Statistics) and to the Statistical Regions (SR) agreed between European Commission and Iceland, Norway and Switzerland. The statistical information included for each NUTS level relates to the main scenario and is summarised below: Europop2013 for NUTS level 2 regions:projected population on 1 January by age and sex;assumptions datasets: age-specific fertility rates, age-specific mortality rates and net migration figures (including statistical adjustment); the assumptions datasets on age-specific fertility rates and age-specific mortality rates for each region at NUTS level 2 were further on used as such for producing the population projections for its component regions at NUTS level 3;approximated values of the life expectancy by age and sex;total numbers of projected live births and deaths;projected population structure indicators: shares of broad age groups in total population, old-age dependency ratios and median age of population;the time horizon covered is from 2013 until 2080;data available are rounded therefore the sum of regional figures for populations and for net migrations will differ from the national ones by few units;287 regions classified as NUTS and SR level 2. Due to the relative small population the following countries have one NUTS level 2 region: Estonia, Cyprus, Latvia, Lithuania, Luxembourg, Malta and Iceland. Thus, for these countries the projected population data for NUTS level 2 region are identical to national data. Europop2013 for NUTS level 3 regions:projected population on 1 January by age and sex;the time horizon covered is from 2014 until 2050;projected population structure indicators: shares of broad age groups in total population, old-age dependency ratios and median age of population;assumptions dataset on international net migration figures (including statistical adjustment);data available are rounded therefore the sum of regional figures for populations will differ from the upper NUTS level 2 ones by few units;1362 regions classified as NUTS and SR level 3. Due to the relative small population Cyprus and Luxembourg have only one NUTS level 3 region. Thus, for these two countries the projected population data at NUTS level 3 are identical to the ones at NUTS level 2 and at national level.

The Maritime Transport Costs (MTC)database contains data from 1991 to the most recent available year of bilateral maritime transport costs. Transport costs are available for 43 importing countries (including EU15 countries as a custom union) from 218 countries of origin at the detailed commodity (6 digit) level of the Harmonized System 1988. This dataset should only be used in conjunction with the paper Clarifying Trade Costs in Maritime Transport which outlines methodology, data coverage and caveats to its use. Key Statistical Concept Import charges represent the aggregate cost of all freight, insurance and other charges (excluding import duties) incurred in bringing the merchandise from alongside the carrier at the port of export and placing it alongside the carrier at the first port of entry in the importing country. Insurance charges are therefore included in the transport cost variables and are estimated to be approximately 1.5% of the import value of the merchandise.

The Structure of Earnings Survey (SES) is a 4-yearly survey which provides EU-wide harmonised structural data on gross earnings, hours paid and annual days of paid holiday leave, which are collected every four years under Council Regulation (EC) No 530/1999 concerning structural statistics on earnings and on labour costs, and Commission Regulation (EC) No 1738/2005 amending Regulation (EC) No 1916/2000 as regards the definition and transmission of information on the structure of earnings. The objective of this legislation is so that National Statistical Institutes (NSIs) provide accurate and harmonised data on earnings in EU Member States and other countries for policy-making and research purposes. The SES 2010 provides detailed and comparable information on relationships between the level of hourly, monthly and annual remuneration, personal characteristics of employees (sex, age, occupation, length of service, highest educational level attained, etc.) and their employer (economic activity, size and economic control of the enterprise). Regional data is also available for some countries and regional metadata is identical to that provided for national data.

The Structure of Earnings Survey (SES) is a 4-yearly survey which provides EU-wide harmonised structural data on gross earnings, hours paid and annual days of paid holiday leave, which are collected every four years under Council Regulation (EC) No 530/1999 concerning structural statistics on earnings and on labour costs, and Commission Regulation (EC) No 1738/2005 amending Regulation (EC) No 1916/2000 as regards the definition and transmission of information on the structure of earnings. The objective of this legislation is so that National Statistical Institutes (NSIs) provide accurate and harmonised data on earnings in EU Member States and other countries for policy-making and research purposes. The SES 2010 provides detailed and comparable information on relationships between the level of hourly, monthly and annual remuneration, personal characteristics of employees (sex, age, occupation, length of service, highest educational level attained, etc.) and their employer (economic activity, size and economic control of the enterprise). Regional data is also available for some countries and regional metadata is identical to that provided for national data.

The Structure of Earnings Survey (SES) is a 4-yearly survey which provides EU-wide harmonised structural data on gross earnings, hours paid and annual days of paid holiday leave, which are collected every four years under Council Regulation (EC) No 530/1999 concerning structural statistics on earnings and on labour costs, and Commission Regulation (EC) No 1738/2005 amending Regulation (EC) No 1916/2000 as regards the definition and transmission of information on the structure of earnings. The objective of this legislation is so that National Statistical Institutes (NSIs) provide accurate and harmonised data on earnings in EU Member States and other countries for policy-making and research purposes. The SES 2010 provides detailed and comparable information on relationships between the level of hourly, monthly and annual remuneration, personal characteristics of employees (sex, age, occupation, length of service, highest educational level attained, etc.) and their employer (economic activity, size and economic control of the enterprise). Regional data is also available for some countries and regional metadata is identical to that provided for national data.

This Dataset contains Indicators related to IC Development Index and Tables from "Measuring the Information Society Report 2018, Volume 1" For Indicators for other ICT Development data please refer: https://knoema.com/ITUKIICT2019/global-ict-developments

This Dataset presents merchandise trade by trading partner and product based on the SITC commodity classification, Revision 3, at the one- and two-digit level, expressed in thousands of United States dollars. The data are also summarized by group of economies, for both reporting economy and trading partner, and by broader product groups.

This Dataset presents product concentration and diversification indices.  The diversification index indicates whether the structure of exports or imports by product of a given country or country group differs from the world pattern. The product concentration index shows how exports and imports of individual countries or country groups are concentrated on a few products or otherwise distributed in a more homogeneous manner among a series of products.

Migration and Remittances Fact book provides a snapshot of migration and remittances for all countries, regions and income groups of the world, compiled from available data from various sources.

Animal production statistics cover three main sub-domains based on three pieces of relevant legislation and related gentlemen’s agreements.Livestock and meat statistics are collected under Regulation (EC) No 1165/2008. They cover meat production, as activity of slaughterhouses (monthly) and as other slaughtering (annual), meat production (gross indigenous production) forecast (semi-annual or quarterly), livestock statistics, including regional statistics. A quality report is also collected every third year.Milk and milk product statistics are collected under Decision 97/80/EC implementing Directive 96/16/EC. They cover farm production and utilisation of milk (annual), collection (monthly for cows’ milk) and production activity by dairies (annual) and statistics on the structure of dairies (every third year). An annual methodological report is also collected.Statistics on eggs for hatching and farmyard poultry chicks are collected under Regulation (EC) No 617/2008, implementing Regulation (EC) No 1234/2007 (Single CMO Regulation). They cover statistics on the structure (annual) and the activity (monthly) of hatcheries as well as reports on the external trade of chicks. European Economic Area countries (EEA, Iceland, Liechtenstein and Norway) are requested to provide milk statistics, with the exception of those related to home consumption, as stated in Annex XXI of the EEA Agreement. As Iceland is now a candidate country and Liechtenstein is exempted in the Agreement, only Norway is concerned. The Agreement between the European Community and the Swiss Confederation on cooperation in the field of statistics states that Switzerland must provide Eurostat with national milk statistics. It has been amended in 2013 for covering also some livestock and meat statistics. The same statistics are requested from the candidate countries as acquis communautaire. Further data about the same topics refer to repealed legal acts or agreements. The tables on animal product supply balance sheets (apro_mk_bal, apro_mt_bal and apro_ec_bal), statistics on the structure of rearing (apro_mt_str) and the number of laying hens (apro_ec_lshen) are therefore no longer updated. The same applies to some variables (external trade of animals and meat), periods (surveys in April or August) or items (number of horses) included in other tables. The statistical tables disseminated by Eurostat are organised into three groups of tables on Agricultural products (apro), i.e. Milk and milk products (apro_mk), Livestock and meat (apro_mt) and Poultry farming (apro_ec). This last label covers statistics on hatcheries and on trade in chicks. The regional animal production statistics collected on livestock (agr_r_animal) and on cows’ milk production on farms (agr_r_milk_pr) are disseminated separately. Due to the change in the legal basis or in the methodology, the time series may be broken. This is indicated by a flag in the tables. The detailed content of each table and the reference to its legal definition is provided in the table below. Table 3.1: Data tables disseminated regarding animal production statistics

Minimum wage statistics published by Eurostat refer to monthly national minimum wages. The data shown here apply to the situation on 1st of January each year. In some countries the basic national minimum wage is not fixed at a monthly rate but at an hourly or weekly rate. For these countries the hourly or weekly rates are converted into monthly rates. The national minimum wage is enforced by law, often after consultation with the social partners, or directly by national intersectoral agreement (this is the case in Belgium and Greece). The national minimum wage usually applies to all employees, or at least to a large majority of employees in the country. Minimum wages are gross amounts, that is, before deduction of income tax and social security contributions. Such deductions vary from country to country.

Day-to-day money market interest rates: averages for the euro area (EONIA= Euro OverNight Index Average), EU27 (theoretical aggregate), and national series (TR, US, JP). 1-month, 3-month, 6-month and 12-month interest rates: averages for the euro area (EURIBOR) and EU27 (theoretical aggregate). 3-month interest rates are also available for the US and Japan.

The National Accounts Main Aggregates Database presents a series of analytical national accounts tables from 1970 onwards for more than 200 countries and areas of the world. It is the product of a global cooperation effort between the Economic Statistics Branch of the United Nations Statistics Division, international statistical agencies and the national statistical services of these countries and is developed in accordance with the recommendation of the Statistical Commission at its first session in 1947 that the Statistics Division should publish regularly the most recent available data on national accounts for as many countries and areas as possible. The database is updated in December of each year with newly available national accounts data for all countries and areas.

Different series numbers (column “Series”) are used to store different time-series versions of national accounts statistics. Series numbers with two digits (10,20) refer to data compiled following the SNA 1968 national accounts methodology, while series numbers with three digits (100, 200, etc) refer to data compiled using the SNA 1993 national accounts methodology whereas series number with four digits (1000, 1100) refer to data compiled using the SNA 2008 national accounts methodology. In addition to different methodologies, different series numbers are used when data are reported in different currencies, fiscal years, or by different sources. Furthermore, data are stored under a new series number whenever there are significant changes in compilation practices which make the time series no longer comparable. Note: Ethiopia [upto 1993] and Ethiopia [from 1993] merged to get Ethiopia, Similarly Sudan (upto 2011) is combined with Sudan.

National Health Accounts (NHA) provides evidence to monitor trends in health spending for all sectors- public and private, different health care activities, providers, diseases, population groups and regions in a country. It helps in developing nationals

Data cited at: Global Fund

Dans le but de promouvoir la comparabilité internationale, les statistiques présentées sur ILOSTAT sont basées sur des définitions internationales standard dans la mesure du possible et peuvent différer des chiffres nationaux officiels. Cette série est basée sur les définitions de la 13e CIST. Pour la comparabilité des séries chronologiques, elle inclut les pays qui ont mis en >uvre les normes de la 19e CIST, pour lesquels des données sont également disponibles dans la base de données Statistiques du travail -- 19e CIST (WORK). Les données sur les heures de travail sont présentées, dans la mesure du possible, sur la base du nombre moyen d'heures de travail par semaine, et en référence aux heures travaillées dans l'emploi principal (rémunéré), indépendamment de l'aménagement du temps de travail (par exemple, temps plein et temps partiel). -temps). Les données ventilées par profession sont présentées conformément à la version plus récente de la Classification Internationale Type des Professions (CITP) disponible. Les données peuvent avoir été reclassées à partir de classifications nationales, qui peuvent ne pas être strictement comparables à la CITP. Pour plus d'informations, reportez-vous à la description de la base de données Indicateurs d'égalité des sexes et de non-discrimination (GEND).

This entry gives the total number of airports or airfields recognizable from the air. The runway(s) may be paved (concrete or asphalt surfaces) or unpaved (grass, earth, sand, or gravel surfaces) and may include closed or abandoned installations. Airports or airfields that are no longer recognizable (overgrown, no facilities, etc.) are not included. Note that not all airports have accommodations for refueling, maintenance, or air traffic control.

The Structure of Earnings Survey (SES) is a 4-yearly survey which provides EU-wide harmonised structural data on gross earnings, hours paid and annual days of paid holiday leave, which are collected every four years under Council Regulation (EC) No 530/1999 concerning structural statistics on earnings and on labour costs, and Commission Regulation (EC) No 1738/2005 amending Regulation (EC) No 1916/2000 as regards the definition and transmission of information on the structure of earnings. The objective of this legislation is so that National Statistical Institutes (NSIs) provide accurate and harmonised data on earnings in EU Member States and other countries for policy-making and research purposes. The SES 2010 provides detailed and comparable information on relationships between the level of hourly, monthly and annual remuneration, personal characteristics of employees (sex, age, occupation, length of service, highest educational level attained, etc.) and their employer (economic activity, size and economic control of the enterprise). Regional data is also available for some countries and regional metadata is identical to that provided for national data.

Other official flows are official sector transactions which do not meet the ODA criteria, e.g.:  i.) Grants to developing countries for representational or essentially commercial purposes;  ii.) Official bilateral transactions intended to promote development but having a grant element of less than 25 per cent;  iii.) Official bilateral transactions, whatever their grant element, that are primarily export-facilitating in purpose. This category includes by definition export credits extended directly to an aid recipient by an official agency or institution ("official direct export credits");  iv.) The net acquisition by governments and central monetary institutions of securities issued by multilateral development banks at market terms;  v.) Subsidies (grants) to the private sector to soften its credits to developing countries [see Annex 3, paragraph A3.5.iv)b)];  vi.) Funds in support of private investment.

Data refer to applications filed directly under the European Patent Convention or to applications filed under the Patent Co-operation Treaty and designated to the EPO (Euro-PCT). Patent applications are counted according to the year in which they were filed at the EPO and are broken down according to the International Patent Classification (IPC). They are also broken down according to the inventor's place of residence, using fractional counting if multiple inventors or IPC classes are provided to avoid double counting.

Value added at factor cost in the ICT sector (source: SBS, variable V12150) Since 2008, definition of the ICT sector is based on NACE Rev. 2 classification as follows: ICT Total (261 + 262 + 263 + 264 + 268 + 951 + 465 + 582 + 61 + 62 + 631) ICT Manufacturing (261 + 262 + 263 + 264 + 268) ICT Services (951 + 465 + 582 + 61 + 62 + 631) Until 2007, definition of the ICT sector is based on NACE Rev. 1.1 classification as follows: ICT Total (30 + 313 + 32 + 332 + 333 + 5184 + 5186 + 642 + 72) ICT Manufacturing (30 + 313 + 32 + 332 + 333) ICT Services (5184 + 5186 + 642 + 72) Total value added at factor cost (source: National Accounts, all branches) Value added at factor cost is defined as Gross value added (at basic prices) minus Other taxes less other subsidies on production. Due to change of the ICT sector definition as a consequence of change of the underlying classification, data for 2008 are not comparable with data published for previous years.

Eurostat Dataset Id:cens_01rews The tables presented in the topic of educational level cover the total population for 31 countries (for more information on received tables and geographic coverage, see "2001 Census Round - Tables Received" in the Annex at the bottom of the page). The level of completeness of the tables depends largely on the availability of data at the respective national statistical institutes. There are four ways of collecting census data, namely: - the traditional method of using census questionnaires (exhaustive census); - the method of using registers and/or other administrative sources; - a combination of registers and/or other administrative sources and - surveys (complete enumerations or sample surveys). Other methods (other mixed census or micro-census) can be used as well. Details for the method employed by each country are provided in "2001 Census Method"in the Annex at the bottom of the page. In the same table you can find the dates on which the census was carried out in each country.

Data cited at: The World Bank https://datacatalog.worldbank.org/ Topic: Population Estimates And Projections Publication: https://datacatalog.worldbank.org/dataset/population-estimates-and-projections License: http://creativecommons.org/licenses/by/4.0/   This database presents population and other demographic estimates and projections from 1960 to 2050. They are disaggregated by age-group and sex and covers more than 200 economies.

The FAOSTAT Population module contains time series data on population, by sex and urban/rural. The series consist of both estimates and projections for different periods as available from the original sources, namely: 1. Population data refers to the World Population Prospects: The 2015 Revision from the UN Population Division. 2. Urban/rural population data refers to the World Urbanization Prospects: The 2014 Revision from the UN Population Division. Long term series estimates and projections from 1961 to 2050. http://www.un.org/en/development/desa/population/

This is part of a supporting dataset for Lester R. Brown, Full Planet, Empty Plates: The New Geopolitics of Food Scarcity (New York: W.W. Norton & Company, 2012).

The World Bank updated the global poverty lines in September 2022. The Poverty data are now expressed in 2017 Purchasing Power Parity (PPP) prices, versus 2011 PPP in previous editions. The new global poverty lines of $2.15, $3.65, and $6.85 reflect the typical national poverty lines of low-income, lower-middle-income, and upper-middle-income countries in 2017 prices.

Private transactions are those undertaken by firms and individuals resident in the reporting country.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Constructions (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Producer (output) prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Constructions (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms: UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesCONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Producer (output) prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesWHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesSERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

The industrial production index shows the output and activity of the industry sector. It measures changes in the volume of output on a monthly basis. Data are compiled according to the Statistical classification of economic activities in the European Community, (NACE Rev. 2, Eurostat). Industrial production is compiled as a "fixed base year Laspeyres type volume-index". The current base year is 2015 (Index 2015 = 100). The index is presented in calendar and seasonally adjusted form. Growth rates with respect to the previous month (M/M-1) are calculated from calendar and seasonally adjusted figures while growth rates with respect to the same month of the previous year (M/M-12) are calculated from calendar adjusted figures.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Constructions (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Producer (output) prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

The main objective of the research is to address the theoretical and empirical problems of how political institutions of high quality can be created and maintained. The second objective is to study the effects of Quality of Government on a number of policy areas, such as health, environment, social policy, and poverty. Data citation: Teorell, Jan, Aksel Sundström, Sören Holmberg, Bo Rothstein, Natalia Alvarado Pachon, Cem Mert Dalli, Rafael Lopez Valverde & Paula Nilsson. 2024. The Quality of Government Standard Dataset, version Jan24. University of Gothenburg: The Quality of Government Institute, https://www.gu.se/en/quality-government doi:10.18157/qogstdjan24

Data cited at: The World Bank https://datacatalog.worldbank.org/ Topic:Quarterly External Debt Statistics GDDS Publication: https://datacatalog.worldbank.org/dataset/quarterly-external-debt-statistics-gdds License: http://creativecommons.org/licenses/by/4.0/   The World Bank launched the new Quarterly External Debt Statistics (QEDS) GDDS database. This database is consistent with the classifications and definitions of the 2013 External Debt Statistics: Guide for Compilers and Users (2013 EDS Guide) and Sixth Edition of Balance of Payments and International Investment Position Manual (BPM6). The QEDS GDDS database provides external debt data, starting from 2002Q4, for an extension of countries that participate in the IMF's General Data Dissemination System (GDDS).

World : Renewable Electricity Capacity and Generation Statistics

Research and experimental development (R&D) comprise creative work undertaken on a systematic basis in order to increase the stock of knowledge, including knowledge of man, culture and society, and the use of this stock of knowledge to devise new applications. R&D expenditures include all expenditures for R&D performed within the business enterprise sector (BERD) on the national territory during a given period, regardless of the source of funds. R&D expenditure in BERD are shown as a percentage of GDP (R&D intensity).

Data on agricultural land-use are valuable for conducting studies on a various perspectives concerning agricultural production, food security and for deriving cropping intensity among others uses. Indicators derived from the land-use categories can also elucidate the environmental sustainability of countries’ agricultural practices. FAOSTAT Land-use statistics contain a wide range of information on variables that are significant for: understanding the structure of a country’s agricultural sector; making economic plans and policies for food security; deriving environmental indicators, including those related to investment in agriculture and data on gross crop area and net crop area which are useful for policy formulation and monitoring. Land-use resources sub-domain covers: Country area (including area under inland water bodies), Land area (excluding area under inland water bodies), Agricultural area, Arable land and Permanent crops, Arable land, Permanent crops, Permanent meadows and pastures, Forest area, Other land and Area equipped for irrigation. Detailed information on sub-categories: Temporary crops, Temporary meadows and pastures, Fallow land (temporary: less than 5 years), Permanent meadows and pastures cultivated and naturally grown and Organic land. Data are available from 1961 to 2009 for more than 200 countries and areas. Forest area: Global Forest Resource Assessment 2010 (FRA 2010) is the main source of forest area data in FAOSTAT. Data were provided by countries for years 1990, 2000, 2005 and 2010. Data for intermediate years were estimated for FAO using linear interpolation and tabulation. Some of the most interesting data for economists is found in this domain. The national distribution of land, among arable land, pastures and other lands, as well as the importance of irrigation are just some of the interesting data sets.

Eurostat Dataset Id:ei_bsrt_m_r2 Six qualitative surveys are conducted on a monthly basis in the following areas: manufacturing industry, construction, consumers, retail trade, services and financial services. Some additional questions are asked on a quarterly basis in the surveys in industry, services, financial services, construction and among consumers. In addition, a survey is conducted twice a year on Investment in the manufacturing sector. The domain consists of a selection for variables from the following type of survey: Industry monthly questions for: production, employment expectations, order-book levels, stocks of finished products and selling price. Industry quarterly questions for:production capacity, order-books, new orders, export expectations, capacity utilization, Competitive position and factors limiting the production. Construction monthly questions for: trend of activity, order books, employment expectations, price expectations and factors limiting building activity. Construction quarterly questions for: operating time ensured by current backlog. Retail sales monthly questions for: business situation, stocks of goods, orders placed with suppliers and firm's employment. Services monthly questions for: business climate, evolution of demand, evolution of employment and selling prices. Services quarterly question for: factors limiting their business Consumer monthly questions for: financial situation, general economic situation, price trends, unemployment, major purchases and savings. Consumer quarterly questions for: intention to buy a car, purchase or build a home, home improvements. Financial services monthly questions for: business situation, evolution of demand and employment Financial services quarterly questions for: operating income, operating expenses, profitability of the company, capital expenditure and competitive position Monthly Confidence Indicators are computed for industry, services, construction, retail trade, consumers (at country level, EU and euro area level) and financial services (EU and euro area). An Economic Sentiment indicator (ESI) is calculated based on a selection of questions from industry, services, construction, retail trade and consumers at country level and aggregate level (EU and euro area). A monthly Euro-zone Business Climate Indicator is also available for industry. The data are published:as balance i.e. the difference between positive and negative answers (in percentage points of total answers)as indexas confidence indicators (arithmetic average of balances),at current level of capacity utilization (percentage)estimated months of production assured by orders (number of months)Unadjusted (NSA) and seasonally adjusted (SA)

Industry, Trade and Services statistics are part of Short-term statistics (STS), they give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are presented in the following forms: UnadjustedCalendar adjustedSeasonally-adjusted Depending on the STS regulation, data are accessible monthly and quarterly. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringLabour input indicators: Number of Persons Employed, Hours Worked, Gross Wages and SalariesConstruction costs IndexBuilding permits indicators*: Number of dwellings WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (in value)Labour input indicators: Number of Persons Employed SERVICES Turnover (in value)*Producer prices (Ouput prices)*

Dans le but de promouvoir la comparabilité internationale, les statistiques présentées sur ILOSTAT sont basées sur des définitions internationales standard dans la mesure du possible et peuvent différer des chiffres nationaux officiels. Cette série est basée sur les définitions de la 13e CIST. Pour la comparabilité des séries chronologiques, elle inclut les pays qui ont mis en >uvre les normes de la 19e CIST, pour lesquels des données sont également disponibles dans la base de données Statistiques du travail -- 19e CIST (WORK). L'emploi salarié concerne les travailleurs ayant des emplois rémunérés avec des contrats de travail leur donnant droit à une rémunération de base qui n'est pas directement dépendante du revenu de l'unité pour laquelle ils travaillent. Les données ventilées par activité économique sont présentées conformément à la version plus récente de la Classification internationale type des industries (CITI) disponible. Les données peuvent avoir été reclassées à partir de classifications nationales, qui peuvent ne pas être strictement comparables à la CITI. Les données ventilées par profession sont présentées conformément à la version plus récente de la Classification Internationale Type des Professions (CITP) disponible. Les données peuvent avoir été reclassées à partir de classifications nationales, qui peuvent ne pas être strictement comparables à la CITP. Pour plus d'informations, reportez-vous à la description de la base de données Statistiques sur la main-d'oeuvre (LFS et STLFS).

L'emploi salarié concerne les travailleurs ayant des emplois rémunérés avec des contrats de travail leur donnant droit à une rémunération de base qui n'est pas directement dépendante du revenu de l'unité pour laquelle ils travaillent. Les données sont présentées par activité économique utilisant la version plus récente de la Classification internationale type des industries (CITI) disponible chaque année. L'activité économique fait référence à l'activité principale de l'établissement dans lequel la personne a travaillé pendant la période de référence, et ne dépend pas des tâches ou des fonctions spécifiques du travail de la personne, mais des caractéristiques de l'entité économique dans laquelle cette personne travaille.

Eurostat Dataset Id:ei_bssi_m_r2 Six qualitative surveys are conducted on a monthly basis in the following areas: manufacturing industry, construction, consumers, retail trade, services and financial services. Some additional questions are asked on a quarterly basis in the surveys in industry, services, financial services, construction and among consumers. In addition, a survey is conducted twice a year on Investment in the manufacturing sector. The domain consists of a selection for variables from the following type of survey: Industry monthly questions for: production, employment expectations, order-book levels, stocks of finished products and selling price. Industry quarterly questions for:production capacity, order-books, new orders, export expectations, capacity utilization, Competitive position and factors limiting the production. Construction monthly questions for: trend of activity, order books, employment expectations, price expectations and factors limiting building activity. Construction quarterly questions for: operating time ensured by current backlog. Retail sales monthly questions for: business situation, stocks of goods, orders placed with suppliers and firm's employment. Services monthly questions for: business climate, evolution of demand, evolution of employment and selling prices. Services quarterly question for: factors limiting their business Consumer monthly questions for: financial situation, general economic situation, price trends, unemployment, major purchases and savings. Consumer quarterly questions for: intention to buy a car, purchase or build a home, home improvements. Financial services monthly questions for: business situation, evolution of demand and employment Financial services quarterly questions for: operating income, operating expenses, profitability of the company, capital expenditure and competitive position Monthly Confidence Indicators are computed for industry, services, construction, retail trade, consumers (at country level, EU and euro area level) and financial services (EU and euro area). An Economic Sentiment indicator (ESI) is calculated based on a selection of questions from industry, services, construction, retail trade and consumers at country level and aggregate level (EU and euro area). A monthly Euro-zone Business Climate Indicator is also available for industry. The data are published: as balance i.e. the difference between positive and negative answers (in percentage points of total answers)as indexas confidence indicators (arithmetic average of balances),at current level of capacity utilization (percentage)estimated months of production assured by orders (number of months)Unadjusted (NSA) and seasonally adjusted (SA)

Eurostat Dataset Id:ei_bsse_m_r2 Six qualitative surveys are conducted on a monthly basis in the following areas: manufacturing industry, construction, consumers, retail trade, services and financial services. Some additional questions are asked on a quarterly basis in the surveys in industry, services, financial services, construction and among consumers. In addition, a survey is conducted twice a year on Investment in the manufacturing sector. The domain consists of a selection for variables from the following type of survey: Industry monthly questions for: production, employment expectations, order-book levels, stocks of finished products and selling price. Industry quarterly questions for:production capacity, order-books, new orders, export expectations, capacity utilization, Competitive position and factors limiting the production. Construction monthly questions for: trend of activity, order books, employment expectations, price expectations and factors limiting building activity. Construction quarterly questions for: operating time ensured by current backlog. Retail sales monthly questions for: business situation, stocks of goods, orders placed with suppliers and firm's employment. Services monthly questions for: business climate, evolution of demand, evolution of employment and selling prices. Services quarterly question for: factors limiting their business Consumer monthly questions for: financial situation, general economic situation, price trends, unemployment, major purchases and savings. Consumer quarterly questions for: intention to buy a car, purchase or build a home, home improvements. Financial services monthly questions for: business situation, evolution of demand and employment Financial services quarterly questions for: operating income, operating expenses, profitability of the company, capital expenditure and competitive position Monthly Confidence Indicators are computed for industry, services, construction, retail trade, consumers (at country level, EU and euro area level) and financial services (EU and euro area). An Economic Sentiment indicator (ESI) is calculated based on a selection of questions from industry, services, construction, retail trade and consumers at country level and aggregate level (EU and euro area). A monthly Euro-zone Business Climate Indicator is also available for industry. The data are published:as balance i.e. the difference between positive and negative answers (in percentage points of total answers)as indexas confidence indicators (arithmetic average of balances),at current level of capacity utilization (percentage)estimated months of production assured by orders (number of months)Unadjusted (NSA) and seasonally adjusted (SA)

This table presents annual statistics on international trade in services of individual economies by trading partner and by 78 selected service categories. In addition, the table contains data for services trade of various groups of economies with "world" and for selected principal service categories. The data presented are the result of the common work of UNCTAD and the World Trade Organization (WTO), in cooperation with the International Trade Center (ITC) and the United Nations Statistics Division (UNSD).

This domain covers statistics and indicators on key aspects of the education systems across Europe. The data show entrants and enrolments in education levels, education personnel and the cost and type of resources dedicated to education. The standards on international statistics on education and training systems are set by the three international organisations jointly administering the annual UOE data collection: the United Nations Educational, Scientific, and Cultural Organisation Institute for Statistics (UNESCO-UIS),the Organisation for Economic Co-operation and Development (OECD) and,the Statistical Office of the European Union (EUROSTAT). The following topics are covered: Pupils and students – Enrolments and EntrantsLearning mobilityEducation personnelEducation financeGraduatesLanguage learningData and indicators disseminated include e.g. participation rates at different levels of education,  shares of pupils and students by programme orientation (general/academic and vocational/professional) and in combined school and work-based programmes, enrolments in public and private institutions, tertiary education graduates, degree mobile students enrolled and graduates, pupil-teacher ratios, foreign language learning, expenditure on education per student and relative GDP etc.

Le taux de chômage représente le nombre de personnes au chômage exprimé en pourcentage de la main-d'>uvre (c>est-à-dire, les personnes en emploi et les personnes au chômage). Les chômeurs comprennent toutes les personnes qui se trouvent: a) sans travail pendant la période de référence, c'est-à-dire pas en emploi ni salarié ni non salarié; b) disponibles pour travailler dans un emploi salarié ou non salarié durant la période de référence; et c) à la recherche d'un travail, c'est-à-dire ayant pris des dispositions spécifiques au cours d'une période récente spécifiée pour chercher un emploi salarié ou non salarié. Pour plus d'informations, veuillez vous référer au Repositoire de Métadonnées sur les Indicateurs des ODD (https://unstats.un.org/sdgs/metadata/) ou à la description de l'indicateur sur ILOSTAT.

Dans le but de promouvoir la comparabilité internationale, les statistiques présentées sur ILOSTAT sont basées sur des définitions internationales standard dans la mesure du possible et peuvent différer des chiffres nationaux officiels. Cette série est basée sur les définitions de la 13e CIST. Pour la comparabilité des séries chronologiques, elle inclut les pays qui ont mis en >uvre les normes de la 19e CIST, pour lesquels des données sont également disponibles dans la base de données Statistiques du travail -- 19e CIST (WORK). Le taux de chômage représente le nombre de personnes au chômage exprimé en pourcentage de la main-d'>uvre (c'est-à-dire, les personnes en emploi et les personnes au chômage). Les chômeurs comprennent toutes les personnes qui se trouvent: a) sans travail pendant la période de référence, c'est-à-dire pas en emploi ni salarié ni non salarié; b) disponibles pour travailler dans un emploi salarié ou non salarié durant la période de référence; et c) à la recherche d'un travail, c'est-à-dire ayant pris des dispositions spécifiques au cours d'une période récente spécifiée pour chercher un emploi salarié ou non salarié. Les données ventilées par niveau d'éducation sont présentées avec référence au plus haut niveau de scolarité complété, selon la Classification internationale type de l'éducation (CITE). Les données peuvent avoir été reclassées à partir de classifications nationales, qui peuvent ne pas être strictement comparables à la CITE. Pour plus d'informations, reportez-vous à la description de la base de données Statistiques sur le marché du travail des jeunes (YouthSTATS).

Dans le but de promouvoir la comparabilité internationale, les statistiques présentées sur ILOSTAT sont basées sur des définitions internationales standard dans la mesure du possible et peuvent différer des chiffres nationaux officiels. Cette série est basée sur les définitions de la 13e CIST. Pour la comparabilité des séries chronologiques, elle inclut les pays qui ont mis en >uvre les normes de la 19e CIST, pour lesquels des données sont également disponibles dans la base de données Statistiques du travail -- 19e CIST (WORK). Le taux de chômage représente le nombre de personnes au chômage exprimé en pourcentage de la main-d'>uvre (c'est-à-dire, les personnes en emploi et les personnes au chômage). Les chômeurs comprennent toutes les personnes qui se trouvent: a) sans travail pendant la période de référence, c'est-à-dire pas en emploi ni salarié ni non salarié; b) disponibles pour travailler dans un emploi salarié ou non salarié durant la période de référence; et c) à la recherche d'un travail, c'est-à-dire ayant pris des dispositions spécifiques au cours d'une période récente spécifiée pour chercher un emploi salarié ou non salarié. Pour plus d'informations, reportez-vous à la description de la base de données Statistiques sur la main-d'oeuvre (LFS et STLFS).

Dans le but de promouvoir la comparabilité internationale, les statistiques présentées sur ILOSTAT sont basées sur des définitions internationales standard dans la mesure du possible et peuvent différer des chiffres nationaux officiels. Cette série est basée sur les définitions de la 13e CIST. Pour la comparabilité des séries chronologiques, elle inclut les pays qui ont mis en >uvre les normes de la 19e CIST, pour lesquels des données sont également disponibles dans la base de données Statistiques du travail -- 19e CIST (WORK). Le taux de chômage représente le nombre de personnes au chômage exprimé en pourcentage de la main-d'>uvre (c'est-à-dire, les personnes en emploi et les personnes au chômage). Les chômeurs comprennent toutes les personnes qui se trouvent: a) sans travail pendant la période de référence, c'est-à-dire pas en emploi ni salarié ni non salarié; b) disponibles pour travailler dans un emploi salarié ou non salarié durant la période de référence; et c) à la recherche d'un travail, c'est-à-dire ayant pris des dispositions spécifiques au cours d'une période récente spécifiée pour chercher un emploi salarié ou non salarié. Pour plus d'informations, reportez-vous à la description de la base de données Indicateurs d'égalité des sexes et de non-discrimination (GEND).

Dans le but de promouvoir la comparabilité internationale, les statistiques présentées sur ILOSTAT sont basées sur des définitions internationales standard dans la mesure du possible et peuvent différer des chiffres nationaux officiels. Cette série est basée sur les définitions de la 13e CIST. Pour la comparabilité des séries chronologiques, elle inclut les pays qui ont mis en >uvre les normes de la 19e CIST, pour lesquels des données sont également disponibles dans la base de données Statistiques du travail -- 19e CIST (WORK). Le taux de chômage représente le nombre de personnes au chômage exprimé en pourcentage de la main-d'>uvre (c'est-à-dire, les personnes en emploi et les personnes au chômage). Les chômeurs comprennent toutes les personnes qui se trouvent: a) sans travail pendant la période de référence, c'est-à-dire pas en emploi ni salarié ni non salarié; b) disponibles pour travailler dans un emploi salarié ou non salarié durant la période de référence; et c) à la recherche d'un travail, c'est-à-dire ayant pris des dispositions spécifiques au cours d'une période récente spécifiée pour chercher un emploi salarié ou non salarié. Le terme handicap, tel qu'il est défini dans la Classification internationale du fonctionnement, du handicap et de la santé, (CIF), est utilisé au sens large, et recouvre déficiences, limitations de l'activité, restrictions de la participation. Les déficiences désignent des problèmes des fonctions organiques ou des structures anatomiques, sous forme d'écart ou de perte importante. Aux effets statistiques, une personne handicapée est définie comme une personne qui est limitée dans le type ou quantité d'activités qu'elle peut entreprendre à cause de difficultés dues à une condition physique, mentale, ou un problème de santé de long terme. Pour plus d'informations, reportez-vous à la description de la base de données Indicateurs du marché du travail pour les personnes handicapées (DLMI).

Dans le but de promouvoir la comparabilité internationale, les statistiques présentées sur ILOSTAT sont basées sur des définitions internationales standard dans la mesure du possible et peuvent différer des chiffres nationaux officiels. Cette série est basée sur les définitions de la 13e CIST. Pour la comparabilité des séries chronologiques, elle inclut les pays qui ont mis en >uvre les normes de la 19e CIST, pour lesquels des données sont également disponibles dans la base de données Statistiques du travail -- 19e CIST (WORK). Le taux de chômage représente le nombre de personnes au chômage exprimé en pourcentage de la main-d'>uvre (c'est-à-dire, les personnes en emploi et les personnes au chômage). Les chômeurs comprennent toutes les personnes qui se trouvent: a) sans travail pendant la période de référence, c'est-à-dire pas en emploi ni salarié ni non salarié; b) disponibles pour travailler dans un emploi salarié ou non salarié durant la période de référence; et c) à la recherche d'un travail, c'est-à-dire ayant pris des dispositions spécifiques au cours d'une période récente spécifiée pour chercher un emploi salarié ou non salarié. Les données ventilées par niveau d'éducation sont présentées avec référence au plus haut niveau de scolarité complété, selon la Classification internationale type de l'éducation (CITE). Les données peuvent avoir été reclassées à partir de classifications nationales, qui peuvent ne pas être strictement comparables à la CITE. Pour plus d'informations, reportez-vous à la description de la base de données Indicateurs sur l'éducation et l'inadéquation (EMI).

Le taux de chômage représente le nombre de personnes au chômage exprimé en pourcentage de la main-d'>uvre (c'est-à-dire, les personnes en emploi et les personnes au chômage). Les chômeurs comprennent toutes les personnes qui se trouvent: a) sans travail pendant la période de référence, c'est-à-dire pas en emploi ni salarié ni non salarié; b) disponibles pour travailler dans un emploi salarié ou non salarié durant la période de référence; et c) à la recherche d'un travail, c'est-à-dire ayant pris des dispositions spécifiques au cours d'une période récente spécifiée pour chercher un emploi salarié ou non salarié. Pour plus d'informations, reportez-vous à la description de la base de données Statistiques sur la migration internationale de main-d'oeuvre (ILMS)).

Le taux de chômage représente le nombre de personnes au chômage exprimé en pourcentage de la main-d'>uvre (c>est-à-dire, les personnes en emploi et les personnes au chômage). Les chômeurs comprennent toutes les personnes qui se trouvent: a) sans travail pendant la période de référence, c'est-à-dire pas en emploi ni salarié ni non salarié; b) disponibles pour travailler dans un emploi salarié ou non salarié durant la période de référence; et c) à la recherche d'un travail, c'est-à-dire ayant pris des dispositions spécifiques au cours d'une période récente spécifiée pour chercher un emploi salarié ou non salarié. Pour plus d'informations, veuillez vous référer au Repositoire de Métadonnées sur les Indicateurs des ODD (https://unstats.un.org/sdgs/metadata/) ou à la description de l'indicateur sur ILOSTAT.

Dans le but de promouvoir la comparabilité internationale, les statistiques présentées sur ILOSTAT sont basées sur des définitions internationales standard dans la mesure du possible et peuvent différer des chiffres nationaux officiels. Cette série est basée sur les définitions de la 13e CIST. Pour la comparabilité des séries chronologiques, elle inclut les pays qui ont mis en >uvre les normes de la 19e CIST, pour lesquels des données sont également disponibles dans la base de données Statistiques du travail -- 19e CIST (WORK). Le taux de participation dans la main-d'oeuvre exprimée en pourcentage de la population en âge de travailler. La main-d'oeuvre est la somme de toutes les personnes en âge de travailler qui sont employées et celles qui sont au chômage. Pour plus d'informations, reportez-vous à la description de la base de données Statistiques sur la main-d'oeuvre (LFS et STLFS).

Dans le but de promouvoir la comparabilité internationale, les statistiques présentées sur ILOSTAT sont basées sur des définitions internationales standard dans la mesure du possible et peuvent différer des chiffres nationaux officiels. Cette série est basée sur les définitions de la 13e CIST. Pour la comparabilité des séries chronologiques, elle inclut les pays qui ont mis en >uvre les normes de la 19e CIST, pour lesquels des données sont également disponibles dans la base de données Statistiques du travail -- 19e CIST (WORK). Le taux de participation dans la main-d'oeuvre exprimée en pourcentage de la population en âge de travailler. La main-d'oeuvre est la somme de toutes les personnes en âge de travailler qui sont employées et celles qui sont au chômage. Les données ventilées par niveau d'éducation sont présentées avec référence au plus haut niveau de scolarité complété, selon la Classification internationale type de l'éducation (CITE). Les données peuvent avoir été reclassées à partir de classifications nationales, qui peuvent ne pas être strictement comparables à la CITE. Pour plus d'informations, reportez-vous à la description de la base de données Indicateurs sur l'éducation et l'inadéquation (EMI).

Dans le but de promouvoir la comparabilité internationale, les statistiques présentées sur ILOSTAT sont basées sur des définitions internationales standard dans la mesure du possible et peuvent différer des chiffres nationaux officiels. Cette série est basée sur les définitions de la 13e CIST. Pour la comparabilité des séries chronologiques, elle inclut les pays qui ont mis en >uvre les normes de la 19e CIST, pour lesquels des données sont également disponibles dans la base de données Statistiques du travail -- 19e CIST (WORK). Le taux de participation dans la main-d'oeuvre exprimée en pourcentage de la population en âge de travailler. La main-d'oeuvre est la somme de toutes les personnes en âge de travailler qui sont employées et celles qui sont au chômage. Les données ventilées par niveau d'éducation sont présentées avec référence au plus haut niveau de scolarité complété, selon la Classification internationale type de l'éducation (CITE). Les données peuvent avoir été reclassées à partir de classifications nationales, qui peuvent ne pas être strictement comparables à la CITE. Pour plus d'informations, reportez-vous à la description de la base de données Indicateurs sur l'éducation et l'inadéquation (EMI).

Dans le but de promouvoir la comparabilité internationale, les statistiques présentées sur ILOSTAT sont basées sur des définitions internationales standard dans la mesure du possible et peuvent différer des chiffres nationaux officiels. Cette série est basée sur les définitions de la 13e CIST. Pour la comparabilité des séries chronologiques, elle inclut les pays qui ont mis en >uvre les normes de la 19e CIST, pour lesquels des données sont également disponibles dans la base de données Statistiques du travail -- 19e CIST (WORK). Cette série harmonisée pour l'emploi informel est dérivées en utilisant le même ensemble de critères à travers les pays pour améliorer la comparabilité. Les critères utilisés sont basés sur le statut d'emploi, le secteur institutionnel, la destination de la production, la comptabilité, l'enregistrement, la cotisation de sécurité sociale, les lieux de travail et la taille. Les données ventilées par activité économique sont présentées conformément à la version plus récente de la Classification internationale type des industries (CITI) disponible. Les données peuvent avoir été reclassées à partir de classifications nationales, qui peuvent ne pas être strictement comparables à la CITI. Pour plus d'informations, reportez-vous à la description de la base de données Statistiques sur la main-d'oeuvre (LFS et STLFS).

This dataset provides trade and tariff data for countries where the reporter is "World".

This collection provides users with data concerning R&D expenditure and R&D personnel broken down by following institutional sectors: business enterprise (BES), government (GOV), higher education (HES), private non-profit (PNP) with the total of sectors. All data are broken down by the above mentioned sectors of performance. The R&D expenditure is further broken down by source of funds, by type of costs, by economic activity (NACE Rev.2), by size class, by type of R&D, by fields of science, by socio-economic objectives and by regions (NUTS 2 level). Besides R&D expenditures in basic unit National currency (MIO_NAC) the following units are available: Euro (MIO_EUR), Euro per inhabitant (EUR_HAB) Purchasing Power Standard (MIO_PPS), Purchasing Power Standard at 2005 prices (MIO_PPS_KP05), Purchasing Power Standard per inhabitant at constant 2005 prices (PPS_KP05_HAB), Percentage of GDP (PC_GDP) and Percentage of total R&D expenditure (PC_TOT - for the breakdown by source of funds). R&D personnel data is available in full-time equivalent (FTE), in head count (HC), as a % of employment and as a % of labour force. The data is further broken down by occupation, by qualification, by gender, by size class, by citizenship, by age groups, by fields of science, by economic activity (NACE Rev.2) and by regions (NUTS 2 level). The periodicity of R&D data is biennial except for the key R&D indicators (R&D expenditure, R&D personnel and Researchers by sectors of performance) which are transmitted annually by the EU Member States on the basis of a legal obligation from 2003 onwards. Some other breakdowns of the data may appear on annual basis based on voluntary data provisions. The data are collected through sample or census surveys, from administrative registers or through a combination of sources. R&D data are available for following countries and country groups: - All EU Member States, plus Candidate Countries, EFTA Countries, the Russian Federation, China, Japan, the United States and South Korea. - Country groups: EU-28, EU-15 and EA-18. R&D data are compiled in accordance to the guidelines laid down in the Proposed standard practice for surveys of research and experimental development - Frascati Manual (FM), OECD, 2002 .

Total Official Flows: the sum of Official Development Assistance (ODA) and Other Official Flows (OOF) represents the total (gross or net) disbursements by the official sector at large to the recipient country shown.

This collection provides users with data concerning R&D expenditure and R&D personnel broken down by following institutional sectors: business enterprise (BES), government (GOV), higher education (HES), private non-profit (PNP) with the total of sectors. All data are broken down by the above mentioned sectors of performance. The R&D expenditure is further broken down by source of funds, by type of costs, by economic activity (NACE Rev.2), by size class, by type of R&D, by fields of science, by socio-economic objectives and by regions (NUTS 2 level). Besides R&D expenditures in basic unit National currency (MIO_NAC) the following units are available: Euro (MIO_EUR), Euro per inhabitant (EUR_HAB), Purchasing Power Standard (MIO_PPS), Purchasing Power Standard at 2005 prices (MIO_PPS_KP05), Purchasing Power Standard per inhabitant at constant 2005 prices (PPS_KP05_HAB), Percentage of GDP (PC_GDP) and Percentage of total R&D expenditure (PC_TOT - for the breakdown by source of funds). R&D personnel data is available in full-time equivalent (FTE), in head count (HC), as a % of employment and as a % of labour force. The data is further broken down by occupation, by qualification, by gender, by size class, by citizenship, by age groups, by fields of science, by economic activity (NACE Rev.2) and by regions (NUTS 2 level). The periodicity of R&D data is biennial except for the key R&D indicators (R&D expenditure, R&D personnel and Researchers by sectors of performance) which are transmitted annually by the EU Member States on the basis of a legal obligation from 2003 onwards. Some other breakdowns of the data may appear on annual basis based on voluntary data provisions. The data are collected through sample or census surveys, from administrative registers or through a combination of sources. R&D data are available for following countries and country groups: - All EU Member States, plus Candidate Countries, EFTA Countries, the Russian Federation, China, Japan, the United States and South Korea. - Country groups: EU-28, EU-15 and EA-18. R&D data are compiled in accordance to the guidelines laid down in the Proposed standard practice for surveys of research and experimental development - Frascati Manual (FM), OECD, 2002 .

Total Receipts, Net: in addition to Official Development Assistance, this heading includes in particular: other official bilateral transactions which are not concessional or which, even though they have concessional elements, are primarily trade facilitating in character (i.e., "Other Official Flows''); changes in bilateral long-term assets of the private non-monetary and monetary sectors, in particular guaranteed export credits, private direct investment, portfolio investment and, to the extent they are not covered in the preceding headings, loans by private banks. Flows from the multilateral sector which are not classified as concessional are also included here.

International trade in goods statistics are an important data source for many public and private sector decision-makers at international, European Union and national level. For example, at the European Union level, international trade data are extensively used for multilateral and bilateral negotiations within the framework of the common commercial policy, to define and implement anti-dumping policy, to evaluate the progress of the Single Market and many other policies. Moreover, they constitute an essential source for the compilation of balance of payments statistics and national accounts. International trade in goods statistics cover both extra- and intra-EU trade: Extra-EU trade statistics cover the trading of goods between Member States and a non-member countries. Intra-EU trade statistics cover the trading of goods between Member States. "Goods" means all movable property including electricity. Detailed and aggregated data are published for the Euro area, the European Union and for each Member State separately. Main components: Data record the monthly trade between Member States in terms of arrivals and dispatches of goods as well as the monthly trade in terms of imports and exports between Member States and non-member countries. However, in publications only the term “exports” for all outward flows and “imports” for all inward flows are applied for both intra-EU trade and extra-EU trade. Extra-EU trade imports and exports are recorded in the Member State where the goods are placed under the customs procedures. Extra-EU trade statistics do not record goods in transit, goods placed into customs warehouses or goods for temporary admission. Data sources: The statistical information is mainly provided by the traders on the basis of Customs (extra-EU) and Intrastat (intra-EU) declarations. Data are collected by the competent national authorities of the Member States and compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Classification systems: - Product classification: For detailed data, products are disseminated according to the Combined Nomenclature (CN8), which first six digit codes coincide with the Harmonized Commodity Description and Coding System (HS), products are disseminated as well according to the Standard International Trade Classification (SITC) and the Broad Economic Categories (BEC). - Country classification: The Geonomenclature is used for classifying reporting countries and trading partners. Nomenclatures and correspondence tables are available at the Eurostat’s classification server RAMON. The following basic information is provided by Eurostat: - reporting country, - reference period, - trade flow, - product, - trading partner - mode of transport. Detailed data are disseminated according to the Combined Nomenclature (HS2, HS4, HS6 and CN8 levels) for the following indicators: - trade value (in Euro), - trade quantity in 100 kg, - trade quantity in supplementary units (published for some goods according to the Combined Nomenclature). Aggregated data cover both short and long term indicators. Short term indicators are disseminated according to major SITC and BEC groups for the following indicators: - gross and seasonally adjusted trade value (in million Euro), - unit-value indices, - gross and seasonally adjusted volume indices, - growth rates of trade values and indices. Long term indicators are disseminated according to major SITC groups for the following indicators: - trade value (in billion Euro), - shares of Member States in EU and world trade, - shares of main trading partners in EU trade, - volume indices. Adjustments are applied by the Member States to compensate the impact of exemption thresholds, which release the information providers from statistical formalities, as well as, to take into account the late or not response of the providers. In addition, Eurostat applies seasonal adjustments to aggregated time series.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Constructions (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Producer (output) prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

The Turnover Index is a business cycle indicator showing the monthly evolution of the market of goods and services in the industrial sector. It also records the evolution of turnover over longer periods of time. The turnover of industry index is not deflated. It is therefore the objective of this indicator to measure the market activity in the industrial sector in value. Data are compiled according to the Statistical classification of economic activities in the European Community, (NACE Rev. 2, Eurostat). Industrial turnover is compiled as a "fixed base year Laspeyres type volume-index". The current base year is 2015 (Index 2015 = 100). The index is presented in calendar and seasonally adjusted form. Growth rates with respect to the previous month (M/M-1) are calculated from calendar and seasonally adjusted figures while growth rates with respect to the same month of the previous year (M/M-12) are calculated from calendar adjusted figures.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Reporting of new Aggregate Case and Death Count data was discontinued on May 11, 2023, with the expiration of the COVID-19 public health emergency declaration. According to the source, this dataset will receive a final update on June 1, 2023, to reconcile historical data.

The Yearbook of Immigration Statistics is a compendium of tables that provides data on foreign nationals who, during a fiscal year, were granted lawful permanent residence (i.e., admitted as immigrants or became legal permanent residents), were admitted into the United States on a temporary basis (e.g., tourists, students, or workers), applied for asylum or refugee status, or were naturalized.

The United Nations Industrial Commodity Statistics Database provides annual statistics on the production of major industrial commodities by country. Data are provided in terms of physical quantities as well as monetary value. The online database covers the years 1995 to 2013. Additional historical data is available on request, based on a different product list, for the years 1950-2003.

The Energy Statistics Database contains comprehensive energy statistics on the production, trade, conversion and final consumption of primary and secondary; conventional and non-conventional; and new and renewable sources of energy. The Energy Statistics dataset, covering the period from 1990 onwards, is available at UNdata

The dataset is set of three datasets:  UNCTADGDPDNI2022 UNCTADMTS2021 UNCTPAE2020 This table is a compilation of statistics of trade in goods and services as reported in the Balance of Payments. The conceptual framework used for the compilation is based on the IMF Balance of Payments Manual (BPM5, 1993). Notes: The statistics presented correspond to the concepts and definitions of the IMF Balance of Payments and International Investment Position Manual, Sixth Edition (BPM6), except those countries and territories who present their figures according to the fifth edition of the Manual (BPM5). Exports and imports of goods and services are credits and debits of goods and services as reported in the current account of the balance of payments.  Goods include general merchandise on a BOP basis, goods under "merchanting" and nonmonetary gold. In order for a transaction to be recorded under "goods", a change of ownership from/to a resident of a local country to/from a non-resident in a foreign country has to take place.  BOP-based statistics of trade in goods (change of ownership principle between residents and non-residents) are usually not comparable to IMTS-based merchandise trade data (physical border crossing principle) due to differences in the concepts and definitions. In some countries, the differences may be quite significant. Trade in services results from intangible actions such as transportation, travel, maintenance and repairs, business services, royalties or licensing.  Estimated individual countries figures are included in geographical regions or economic groupings calculation but not always shown separately. 

The Unemployment - LFS adjusted series (including also Harmonised long-term unemployment) is a collection of monthly, quarterly and annual series based on the quarterly results of the EU Labour Force Survey (EU-LFS), which are, where necessary, adjusted and enriched in various ways, in accordance with the specificities of an indicator. Harmonised unemployment is published in the section 'LFS main indicators', which is a collection of the main statistics on the labour market. However the harmonized unemployment indicators are calculated with special methods and periodicity which justify the present page. This page focuses on the particularities of the estimation of harmonised unemployment (including unemployment rates). Other information on 'LFS main indicators' can be found in the respective ESMS page, see link in section 'related metadata'. General information on the EU-LFS can be found in the ESMS page for 'Employment and unemployment (LFS)'.  Detailed information on the main features, the legal basis, the methodology and the data as well as on the historical development of the EU-LFS is available on the EU-LFS (Statistics Explained) webpage.

National Monitoring : School life expectancy by level of education

This Dataset contains Regional and National level Data.

Estimates on the use of water, sanitation and hygiene by country (2000-2020)

World Health Organization 2023 data.who.int, WHO Coronavirus (COVID-19) dashboard > Data [Dashboard]. https://data.who.int/dashboards/covid19/data

The ease of doing business score helps assess the absolute level of regulatory performance over time. It captures the gap of each economy from the best regulatory performance observed on each of the indicators across all economies in the Doing Business sample since 2005. One can both see the gap between a particular economy’s performance and the best performance at any point in time and assess the absolute change in the economy’s regulatory environment over time as measured by Doing Business. An economy’s ease of doing business score is reflected on a scale from 0 to 100, where 0 represents the lowest and 100 represents the best performance. For example, an ease of doing business score of 75 in Doing Business 2019 means an economy was 25 percentage points away from the best regulatory performance constructed across all economies and across time. A score of 80 in Doing Business 2020 would indicate the economy is improving   NOTE- The source discontinued this dataset; Reference-Doing Business Legacy (worldbank.org)

Global growth is projected to slow to its third-weakest pace in nearly three decades, overshadowed only by the 2009 and 2020 global recessions. Investment growth in emerging market and developing economies is predicted to remain below its average rate of the past two decades. In his Foreword, World Bank Group President David Malpass emphasizes that the crisis facing development is intensifying. The latest growth forecasts indicate a sharp, long-lasting slowdown and the deterioration is broad-based: in virually all regions of the world, per-captia income growth will be slower than it was during the decade before Covid-19.

Climate change is expected to hit developing countries the hardest. Its effects—higher temperatures, changes in precipitation patterns, rising sea levels, and more frequent weather-related disasters—pose risks for agriculture, food, and water supplies. At stake are recent gains in the fight against poverty, hunger and disease, and the lives and livelihoods of billions of people in developing countries. Addressing climate change requires unprecedented global cooperation across borders. The World Bank Group is helping support developing countries and contributing to a global solution, while tailoring our approach to the differing needs of developing country partners. Data here cover climate systems, exposure to climate impacts, resilience, greenhouse gas emissions, and energy use. Other indicators relevant to climate change are found under other data pages, particularly Environment, Agriculture & Rural Development, Energy & Mining, Health, Infrastructure, Poverty, and Urban Development.

  For the following indicators, Knoema modified the original reported values by multiplying by 100 to display in percent value in accordance with the WID unit labels: Capital share of national incomeIncome reduction as a result of income taxLabor share of national incomeNet Corporate Wealth to Net National Income RatioNet national wealth to Net National Income RatioNet Non-Profit Wealth to Net National Income RatioNet Personal Wealth to Net National Income RatioNet Private Wealth to Net National Income RatioNet Public Wealth to Net National Income Ratio

Data cited at: The World Bank https://datacatalog.worldbank.org/ Topic: World Integrated Trade Solution Trade Stats Publication: https://datacatalog.worldbank.org/dataset/world-integrated-trade-solution-trade-stats License: http://creativecommons.org/licenses/by/4.0/   WITS Trade Stats is a database created by aggregating data from UN COMTRADE and UNCTAD TRAINS database. It provides information on bilateral trade exports, imports and tariffs for over 180 countries and regions.  

The World Investment Report focuses on trends in foreign direct investment (FDI) worldwide, at the regional and country levels and emerging measures to improve its contribution to development. This Report further focuses on:Analysis of the trends in FDI during the previous year, with especial emphasis on the development implications.Ranking of the largest transnational corporations in the world.In-depth analysis of a selected topic related to FDI.Policy analysis and recommendations.Statistical annex with data on FDI flows and stocks for 196 economies.

The 2022 Revision of World Population Prospects is the twenty-seventh edition of official United Nations population estimates and projections that have been prepared by the Population Division of the Department of Economic and Social Affairs of the United Nations Secretariat.

This table provides estimates from 1950 to 2021 and projections (medium fertility variant) from 2022 to 2050 of total population and urban population, expressed in thousands and as a percentage of total population, respectively. Population refers to de facto population in a country, area or region as of 1 July of the indicated year. Sources:UN DESA Population Division, World Population Prospects 2022UN DESA Population Division, World Urbanization Prospects 2018Eurostat for Republic of Cyprus (1975 - 2050) and Ukraine (2015 – 2022)UNCTAD secretariat estimates Notes: The figures for certain groups may differ from those published by above mentioned sources, where UNCTAD definitions for the groups are different.

The 2018 Revision of World Urbanization Prospects presents the latest United Nations estimates of the size of urban and rural populations for 233 countries or areas from 1950 to 2018, with projections until 2050. It also includes data on population size for close to 1900 urban settlements having 300000 inhabitants or more in 2018. These 1900 cities or urban areas are now home to nearly 60 per cent of the world’s urban population.

The Worldwide Governance Indicators (WGI) project reports aggregate and individual governance indicators for over 200 countries and territories over the period 1996–2020, for six dimensions of governance:Voice and AccountabilityPolitical Stability and Absence of ViolenceGovernment EffectivenessRegulatory QualityRule of LawControl of Corruption The Worldwide Governance Indicators (WGI) are a research dataset summarizing the views on the quality of governance provided by a large number of enterprise, citizen and expert survey respondents in industrial and developing countries. These data are gathered from a number of survey institutes, think tanks, non-governmental organizations, international organizations, and private sector firms. The WGI do not reflect the official views of the World Bank, its Executive Directors, or the countries they represent. The WGI are not used by the World Bank Group to allocate resources. Measure description: Estimate:-Estimate of governance (ranges from approximately -2.5 (weak) to 2.5 (strong) governance performance) Standard error (StdErr):-Standard error reflects variability around the point estimate of governance. Number of sources (NumSrc):-Number of data sources on which estimate is based Rank:-Percentile rank among all countries (ranges from 0 (lowest) to 100 (highest) rank) Lower:-Lower bound of 90% confidence interval for governance, in percentile rank terms Upper:-Upper bound of 90% confidence interval for governance, in percentile rank terms